Bedienungsanleitung Marantz SR5003 (Seite 8 von 81) (Englisch)

522803

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

NAMES AND

FUNCTION

PURE DIRECT button and indicator

When this button is pressed once, “SOURCE

DIRECT” appears on the FL display. If pressed again,

“PURE DIRECT” appears. After 2 seconds, the FL

display indication goes out.

In the source/pure direct mode, the tone control

circuitry and bass management are bypassed.

Notes:

• The surround mode is automatically switched to

AUTO when the pure direct function is turned on.

• Additionally, speaker configurations are fixed

automatically as follows.

Front SPKR = LARGE

Center SPKR = LARGE

Surround SPKR = LARGE

Surround Back SPKR = LARGE

Sub woofer = YES

y DISPLAY button

Press this button to change the FL display mode.

u MENU button

Press this button to enter the SETUP MAIN MENU.

i EXIT button

Press this button to exit from the SETUP MAIN

MENU.

q POWER switch and STANDBY

indicator

When this switch is pressed once, the unit turns ON

and the display illuminates. When pressed again, the

unit turns OFF and the STANDBY indicator will be

illuminated.

w INPUT SELECTOR knob

(AUDIO/ VIDEO)

This knob is used to select the input sources. (See

page 16)

e SURROUND MODE button

Press this button to select the surround mode.

r AUTO (Auto surround) button

Press this button to select the AUTO mode from the

surround modes. When this mode is selected, the

unit determines the surround mode corresponding to

a digital input signal automatically.

o BAND button

Press this button to switch between FM and AM in

the TUNER mode.

!0 T-MODE button

Press this button to select the auto stereo mode or

mono mode when the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode.

(See page 17)

!1 MEMORY button

Press this button to enter the tuner preset memory

numbers or station names. (See page 47)

!2 CLEAR button

Press this button to cancel the station-memory

setting mode or preset scan tuning. (See page 48)

!3 VOLUME control knob

This knob is used to adjust the overall sound level.

Turning the control clockwise increases the sound

level.

INFRARED receiving sensor window

This window receives infrared signals for the remote

controller.

!5 AUX1 INPUT jacks

These auxiliary video/audio input jacks accept the

connections of a camcorder, portable DVD, game

etc. When not using these jacks, protect by the jack

cover.

Cursor (

5, ∞, 2, 3

) / ENTER button

Press these buttons to operate the SETUP MAIN

MENU and TUNER function.

!7 MIC jack

Automatically measure speaker characteristics using

the included microphone. (See page 30)

HEADPHONE jack for stereo headphones

This jack may be used to listen to the unit’s output

through a pair of headphones. Be certain that the

headphones have a standard 1/4” stereo phono

plug.

NAMES AND FUNCTION

w!3

e u io !0 !1 !2t yq

!5!7!8 !6

FRONT PANEL

SR5003_U_1_ENG 1_3.indd 5SR5003_U_1_ENG 1_3.indd 5 08.7.4 4:48:05 PM08.7.4 4:48:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5003 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR5003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info