Bedienungsanleitung Marantz SR5004 (Seite 40 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERSSETUP

ENGLISH

SETUP

6 ACOUSTIC EQ

This display is for setting up the equalizer and

changing the Equalizer mode.

1. Select “Acoustic EQ” from Main Menu with

the 3 or 4 cursor buttons and press the

ENTER button.

2. Select the desired menu with the 3 or

4 cursor buttons and press the ENTER

button.

After you complete this portion of the setup, move

the cursor to “RETURN” with the 3 or 4 cursor

buttons and press the ENTER button.

• EQ Mode:

There are 4 equalizer modes to choose from: Preset

Graphic EQ that allows the user to manually adjust

the equalizer, and Audyssey

, Audyssey Front and

Audyssey Flat that automatically adjust the equalizer

from the measurement results of the Auto Setup

feature (see page 28).

Audyssey Front:

Front L/R channels have no EQ correction applied

while all other channels use the standard Audyssey

mode for EQ correction.

Audyssey Flat:

This mode ﬂ attens the frequency characteristics of

all speakers. It is suited for playback of multichannel

music such as Dolby Digital and DTS.

Audyssey:

This mode adjusts the frequency characteristics

of all speakers so as to create the best listening

environment for the sound characteristics of the

listening room.

User:

This mode adjusts the graphic equalizer that was

set in Adjust User EQ to adjust the characteristics

of each speaker (see page 39).

Off:

The graphic equalizer is not used.

To use the remote controller to change the EQ

Mode, press the AMP button and press the EQ

button.

Each time this button is pressed, the EQ Mode

changes as follows.

Off Audyssey Front

Audyssey Fla

User Audyssey

Notes

• “Audyssey Front”, “Audyssey Flat” and

“Audyssey” can be selected after executing the

Auto Setup feature.

• If a speaker that was determined “No” in Auto

Setup is manually turned on, the “Audyssey”,

“Audyssey Front” and “Audyssey Flat” modes

cannot be selected.

•

If, after auto setup was performed, changes were made

to the settings, such as the speaker conﬁ guration and

distance, channel levels and crossover frequencies,

without increasing the number of speakers whose

characteristics were measured, “*” will be displayed

for the name of the mode.

Example: “Audyssey Flat*”

• The equalizer turns off when the Pure Direct

mode, Source Direct mode, Dolby Headphone or

Virtual mode is set.

• Acoustic EQ Modes are not used during playback

of Dolby TrueHD, Dolby Digital Plus, or DTS-

HD signals.

Even in this case, settings made using Speaker

Auto Setup (speaker yes/no, distance, size,

channel level, crossover) are enabled.

• Tone Control is disabled when an EQ Mode is in

use.

• Adjust User EQ :

“6-1 ADJUST USER EQ” (see page 39)

• Check Audyssey MultEQ

“6-2 CHECK AUDYSSEY MULTEQ” (see page 39)

• Audyssey Dynamic EQ

Audyssey Dynamic EQ solves the problem of

deteriorating sound quality as volume is decreased

by taking into account human perception and room

acoustics. Audyssey Dynamic EQ works in tandem

with Audyssey MultEQ to provide well-balanced

sound for every listener at any volume level.

Select “On” or “Off” with the 1 or 2 cursor

buttons.

• Audyssey Dynamic EQ

Adjust :

Audyssey Dynamic EQ is referenced to the standard

ﬁ lm mix level of 85 dB SPL for -20 dBFS. Due to

the lack of standards outside the ﬁ lm industry, the

ﬁ lm reference level may not be appropriate when

listening to other material.

Audyssey Dynamic EQ Adjust provides three offsets

from the ﬁ lm level reference (5 dB, 10 dB, and 15

dB) that can be selected when the mix level of the

content is not within the standard.

0 dB (Film Ref):

This is the default setting and should be used when

listening to movies.

5 dB:

Select this setting for content that has a very wide

dynamic range, such as classical music.

10 dB:

Select this setting for jazz or other music that has a

wider dynamic range.

This setting should also be selected for TV content

as that is usually mixed at 10 dB below film

referencce.

15 dB:

Select this setting for pop/rock music or other

program material that is mixed at very high listening

levels and has a compressed dynamic range.

Note

If Dynamic EQ is set to “Off”, these settings cannot

be selected.

• Audyssey Dynamic Volume

Audyssey Dynamic Volume solves the problem of

large variations in volume level between television

programs, commercials, and between the soft

and loud passages of movies. Audyssey Dynamic

EQ is integrated into Dynamic Volume so that as

the playback volume is adjusted automatically, the

perceived bass response, tonal balance, surround

impression and dialog clarity remain the same.

The amount of compression can be set to any of

three levels.

Select “Light”, “Medium”, “Heavy” or “Off” with

the 1 or 2 cursor buttons.

Note

When Audyssey Dynamic EQ is off, Audyssey

Dynamic Volume cannot be used.

To change Audyssey Dynamic EQ and Audyssey

Dynamic Volume using the remote controller, press

the D.EQ/VOL button. Each time this button is

pressed, the mode changes in the sequence shown

below.

Off → Audyssey Dynamic EQ: On,

Audyssey Dynamic Volume: Off

→ Audyssey Dynamic EQ: On,

Audyssey Dynamic Volume: Light

→ Audyssey Dynamic EQ: On,

Audyssey Dynamic Volume: Medium

→ Audyssey Dynamic EQ: On,

Audyssey Dynamic Volume: Heavy

→ Off → ...

Marantz SR5004 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info