Bedienungsanleitung Marantz SR5004 (Seite 57 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

ADVANCED

OPERATION

ENGLISH

ADVANCED OPERATION

PRESET SCAN

1. Press the TUNE button twice within two

seconds on the remote controller.

2. Press the BAND button to select SIRIUS

band.

3. press the P.SCAN button on the remote

controller.

4. Preset channels are recalled in sequence

(No.1 → No.2 → etc.) for about 10 seconds

each. The time changes by the received

condition. No stored preset number will be

skipped.

5. Pressing the 2 cursor button during

prescanning speeds up scanning.

Also, pressing the 1 cursor button returns

to the previous preset channel.

6. When the desired preset channel is

received, cancel the preset scan operation

by press the P.SCAN button.

CLEARING STORED PRESET CHANNELS

You can remove preset channels from the memory

using the following procedure.

3.2.

1. Recall the preset number to be cleared with

the method described in ”PRESET SEARCH

MODE”.

2. Press the MEMORY button on the front

panel or the MEMO button on the remote

controller.

3. The stored preset number blinks in the

display for 5 seconds. WhiIe blinking, press

the CLEAR button on the front panel or CLR

button on the remote controller.

4. “xx CLEAR” appears on the dispIay to

indicate that the speciﬁ ed preset number

has been cleared.

Note

• To clear all stored preset channels, press and hold

the T-MODE and the ENTER buttons on the unit

for two seconds.

PARENTAL LOCK

This function is used to lock channels you do not

want to receive.

SETTING/RELEASING PARENTAL LOCK

5.2.3. 5.

1. Tune to the channel that you want to set

parental lock.

2. Press the T.MODE button on the unit or the

P.LOCK button on the remote controller.

PASSWORD

3. When [PASSWORD ****] appears, use

the cursor buttons on the unit or remote

controller, or the numeric buttons on the

remote controller, to enter a password (4

digits), then press the ENTER button on the

unit or the remote controller.

Note

The password is set to 9999 when shipped from

the factory.

PASWORD OK!

SR001 abcdefg

4. When the correct password is entered,

[PASSWORD OK!] is displayed and the

display ﬂ ashes “✔” or “:”.

5. Set parental lock on/off using the 3 /

4 cursor buttons on the unit or remote

controller, then conﬁ rm the setting using

the ENTER button on the unit or remote

controller.

“✔” Lock status

“:” Unlock status

You can unlock all locked channels at this

time by pressing the CLEAR button on the

unit or CLR button on the remote controller

for 5 seconds. When “ALL UNLOCK?” is

displayed, press the ENTER button on the

unit or remote controller. “UNLOCKING..”

is displayed and all locked channels are

unlocked.

Notes

• If you mistakenly enter the wrong password, you

will be asked to reenter the password.

• You can exit parental lock mode using the EXIT

button on the unit or CLR button on the remote

controller.

• No sound will be output when you tune to a locked

channel.

• Although parental lock can be set for more than

one channel, all channels will share the same

password.

• You cannot set Parental Lock for Channel 0.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5004 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info