Bedienungsanleitung Marantz SR5004 (Seite 79 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

ADVANCED

OPERATION

ENGLISH

ADVANCED OPERATION

LEARN MODE

This remote controller is capable of learning and

storing codes used by other remote controls that

you already own.

For codes which are not learned, the remote

controller will transmit either the Marantz preset

codes from the initial settings, or remote codes

from another manufacturer’s AV equipment which

is set by the customer.

The receiver sensor for the remote controller signals

is located at the top of the remote controller.

Notes

• This remote controller is capable to learn around

160 codes.

• When the batteries are getting weak , the learning

procedure is not successful.

LEARNING PROCEDURE

1. Place the remote controller so that its

infrared signal transmitter is facing the

infrared signal receiver on the Marantz

remote controller at a distance of about 5

cm (2 inches).

5 cm

2. Press and hold down the SET and SETUP

buttons until LEARN indicator blinks.

3. Select the SOURCE button to select the

SOURCE.

4. Select the button to be learned.

• LEARN indicator lights up.

Notes

• The learning function is unavailable for all

SOURCE buttons and HDMI button in any

mode.

• The learning function is unavailable for all

buttons in TUNER mode and AMP mode.

5. Press and hold the button of the original

remote controller to learn until the SEND

indicator blinks twice.

Notes

• When the SEND indicator blinks once, repeat this

step.

• If the LEARN indicator ﬂ ashes when the SEND

indicator is lit, then the button cannot be

learned.

• When the memory of the remote controller is full,

the LEARN and SEND indicators blink once. If

you want to learn the code, you should erase other

learned button.

6. Repeat steps 4 and 5 to learn other buttons

in same SOURCE.

7. Repeat steps 3 to 6 to learn other

SOURCE.

8. When you have ﬁ nished programming the

remote controller, press the SET button,

then LEARN indicator stops blinking and

exits from the LEARN mode.

Notes

• When the SEND indicator blinks once again,

the transmitting code is unavailable for remote

controller, or the transmitting signal is intercepted

by noise.

• If no buttons are pressed for approximately 1

minutes while in the LEARN mode, the remote

controller automatically exits from the LEARN

mode.

ERASING PROGRAMMED CODES

(RETURNING TO INITIAL SETTINGS)

Codes can be erased in three ways: by buttons,

sources, and by all memory contents.

Erasing the code by buttons

1. Press and hold down the SET and SETUP

buttons until LEARN indicator blinks.

2. Select the SOURCE button to select the

button to be erased.

3. Press and hold down the HDMI button

and press the learned button twice to be

erased.

• SEND indicator blinks twice and the

mode returns to LEARN mode.

4. To return the NORMAL mode, press the

SET button.

Erasing the code by SOURCE

1. Press and hold down the SET and SETUP

buttons until LEARN indicator blinks.

2. Press and hold down the HDMI button and

press the learned SOURCE button twice to

be erased.

• LEARN indicator lights.

3. Press ENTER button to continue erasing.

• The SEND indicator blinks twice and the

mode returns to LEARN mode.

• To cancel the erasing operation, do not

press ENTER button and simply touch

any other button.

4. To return the NORMAL mode, press the

SET button.

ERASING THE ALL SOURCES

1. Press and hold down the SET and SETUP

buttons until LEARN indicator blinks.

2. Press and hold down the HDMI button and

press POWER ON and POWER OFF button.

• LEARN indicator lights.

3. Press ENTER button to continue erasing.

• The SEND indicator blinks twice and the

mode returns to LEARN mode.

• To cancel the erasing operation, do not

press ENTER button and simply touch

any other button.

4. To return the NORMAL mode, press the SET

button.

Note

Erasing codes will return to the factory preset code,

or there will leave empty if the button has no factory

preset code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5004 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info