Bedienungsanleitung Marantz SR5007 (Seite 101 von 162) (Englisch)

494228

101

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

Playback in ZONE2 (Separate room)

•You can operate this unit so as to enjoy audio in a room (ZONE2)

other than the MAIN ZONE (room where the unit is located).

•You can simultaneously play back the same source in both the MAIN

ZONE and ZONE2. You can also play back separate sources in the

MAIN ZONE and ZONE2.

Audio output

Zone playback by speaker output

•Set the “Assign Mode” (vpage 121) setting to “ZONE2”, and

outputs ZONE2 audio from SURROUND BACK speaker terminals

(The default setting is “ZONE2”).

•If you set the“Assign Mode” (vpage 121) setting to “ZONE2”,

the main zone home theater system can play back up to 5.1 channels.

Even if you play back audio recorded in 6.1 or 7.1 channels, this unit

automatically downmixes the audio to 5.1 channels.

n Connecting and setting the speakers

“Assign Mode” setting

(vpage121) and audio

signals output

Connecting the speakers

ZONE2

Output signal :

Stereo (L / R)

ZONE2

w q w q

(L) (R)

NOTE

It is not possible to play the digital audio signals input from the HDMI,

COAXIAL or OPTICAL connectors in ZONE2. Play using analog

connections (in stereo).

Playback

Press ZONE2 to switch the zone

mode to the ZONE2.

ZONE2 lights.

Input source

select buttons

Press POWER X to turn on the

ZONE2 power.

“ZONE2 ON” appears on the display.

The indicator on the display lights

(vpage136).

•Also press input source select button when

in standby mode, the power turns on.

•When

POWER X is pressed, ZONE2 turns

off.

•Power in ZONE2 can be turned on or off by

pressing ZONE2 ON/OFF on the main unit.

Press the input source select

button to select the input source

to be played.

The audio signal of the selected source

is output to ZONE2.

•To perform an operation with the main unit,

press

ZONE2 SOURCE many times.

Each time you press ZONE2 SOURCE, the

input source changes.

When power for both MAIN ZONE and ZONE2 is set to ON, power

of the MAIN ZONE only can be turned off. In Step 1, press MAIN and

POWER X in this order.

Adjusting the volume

Use VOLUME df to adjust the volume.

GAdjustable rangeH

0 – 40 – 98

(When the “Scale” (vpage108) setting is “0 – 98”)

GAdjustable rangeH

– – –

–79dB – –40dB – 18dB

(When the “Scale” (vpage108) setting is “–79.5dB – 18.0dB”)

•At time of purchase, “Volume Limit” (vpage129) is set to “70

(–10dB)”.

Turn VOLUME after pressing ZONE2 ON/OFF on the main unit to adjust

the sound volume.

Turning off the sound temporarily

Press MUTE :.

The sound is reduced to the level set at “Mute Level” (vpage129)

in the menu.

•To cancel, either adjust the volume or press MUTE : again.

•The setting can also be cancelled by adjusting the volume or turning

off the ZONE2 power.

You can adjust the tone and volume for ZONE2 in “ZONE2 Setup”

(vpage129) in the menu.

Basic version

Advanced version

Information

Advanced version

DVD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5007 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR5007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info