63124
8
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
4
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTION
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
NAMES AND
FUNCTIONS
ENGLISH
r DIMMER button
When this button is pressed once display is dimmed.
When this button is pressed twice, the display is
turned off and the “DISP” indicator lights up.
Press this button again to turn on the display again.
t INFRARED receiving sensor
window
This window receives infrared signals from the
remote control.
y CLEAR button
Press this button to cancel the tuner preset station or
preset scan tuning. (See page 13)
u MUTE button
Press this button to mute the output to the speakers.
Press it again to return to the previous volume level.
i VOLUME control knob
Adjusts the overall sound level. Turning the control
clockwise increases the sound level.
q POWER switch and STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned
ON/OFF by pressing the POWER button on the
remote controller.
When this unit is in the standby mode with the
POWER switch set to the ON position, tuning the
INPUT SELECTOR knob also allows to turn the
power on.
The STANDBY indicator lights up when this unit
is the standby mode (power OFF) by the remote
controller.
w INPUT SELECTOR knob
This knob is used to select the input sources. (See
page 10)
e SOURCE DIRECT button
When this button is pressed, the audio signal will
bypass the tone control circuit to provide the pure
sound quality.
In order not to bypass the tone control circuit, press
SOURCE DIRECT button again.
o MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 13)
!0 T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
!1 TUNING/PRESET 34 (UP/DOWN)
button
This button used for tuning in the desired broadcasting
stations or to preset in the desired broadcasting
stations.
!2 BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!3 F (Frequency)/P (Preset) button
During reception of AM or FM, you can change
the function of the UP/DOWN buttons for scanning
frequencies or selecting preset stations by pressing
this button.
!4 PHONES jack for stereo
headphones
Conventional dynamic headphones can be plugged
in here.
Note:
When using headphones, the speaker A and/or B are
switched automatically to OFF and the sound from
the speakers is muted. The speaker A and/or B return
to the previous setting as soon as the plug is removed
from the jack.
DISP AUTO TUNED ST
SLEEP DIRECT
q w e r y
o
ui
!0!2 !1!3!4
t
NAMES AND FUNCTIONS
FRONT PANEL
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantz SR5023 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Marantz SR5023

Marantz SR5023 Bedienungsanleitung - Holländisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info