Bedienungsanleitung Marantz SR5023 (Seite 14 von 23) (Englisch)

63124

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

1010

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTION

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

BASIC

OPERATION

ENGLISH

BASIC OPERATION

AMPLIFIER OPERATION

TURNING ON THE UNIT

Turn on the power of the audio equipment

connected to this unit. Set the input selector on

the audio equipment to this unit.

Connect the AC power cable to the wall outlet.

Press the POWER ON/OFF button on the unit.

Each time the button is pressed, the power of

the unit switches on/off.

Pressing POWER OFF or SOURCE POWER

after pressing the AMP button on the remote

controller causes the STANDBY indicator on

the unit to light and puts the unit in STANDBY

mode.

To turn the power on while in STANDBY mode,

press the AMP button on the remote controller,

and then press POWER ON or SOURCE

POWER.

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must

ﬁ rst select the input source on the SR5023.

(example : CD)

To select CD, turn the INPUT SELECTOR on the

front panel or press the CD button on the remote

controller.

After you have selected CD, simply turn on the CD

player and play the CD.

• The input name will appear in the display on the

front-panel.

ADJUSTING THE MAIN VOLUME

Adjust the volume to a comfortable level using

the VOLUME control knob on the front panel or

VOLUME 3 / 4 buttons on the remote controller.

To increase the volume, turn the VOLUME knob

clockwise or press VOLUME 3 button on the

remote controller, to decrease the volume, turn

counterclockwise or press VOLUME 4 button on the

remote controller.

Note:

The volume can be adjusted within the range of – 90

(∞) to 0 dB, in steps of 1 dB.

ADJUSTING THE TONE (BASS & TREBLE)

During a listening session you may wish to adjust the

Bass and Treble Control to suit your listening tastes

or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS 3 or BASS 4

on the remote controller.

To adjust the treble effect, press TREBLE 3 or

TREBLE 4 on the remote controller.

Note:

When Source Direct mode is set, tone control is disable.

TEMPORARILY TURNING OFF THE SOUND

To temporarily silence all speaker outputs such as

when interrupted by a phone call, press the MUTE

button on the front panel or MUTE button on the

remote controller.

This will interrupt the output to all speakers and the

head-phone jack, but it will not affect any recording

or dubbing that may be in progress.

When the system is muted, the display will show

“MUTE ON” .

Press the MUTE button again to return to normal

operation.

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the unit’s output

through a pair of headphones. Be certain that the

headphones have a standard 1/4" stereo phono plug.

(Note that the speakers will automatically be turned

off when the headphone jack is in use.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5023 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR5023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info