Bedienungsanleitung Marantz SR5023 (Seite 17 von 23) (Englisch)

63124

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

1313

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTION

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

ADVANCED

OPERATION

ENGLISH

TUNER OPERATION (PRESET MEMORY)

With this unit you can preset up to 50 FM/AM stations

in any order.

For each station, you can memorize the frequency

and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the FM and AM

band and enters all stations with proper signal

strength into the memory.

DISP AUTO TUNED ST

SLEEP DIRECT

2. 4. 5.2.1. 3.

To select FM, press the BAND button on the

front panel.

While pressing the MEMORY button, press the

TUNING/PRESET 3 button.

“AUTO PRESET” will appear on the display,

and scanning starts from the lowest frequency.

Each time the tuner ﬁ nds a station, scanning

will pause and the station will be played for ﬁ ve

seconds.

During this time, the following operations are

possible.

The band can be changed by the BAND button.

If no button is pressed during this period, the

current station is memorized in location Preset

01.

If you wish to skip the current station, press the

TUNING/PRESET 3 button during this period,

this station is skipped and auto presetting

continues.

Operation stops automatically when all 50

preset memory positions are ﬁ lled or when auto

scanning attains the highest end of all bands.

If you desire to stop the auto preset memory at

anytime, press the CLEAR button.

Note:

It is possible that existing preset memory positions

will be overwritten.

MANUAL PRESET MEMORY

2. 4.3.

(Using the unit)

Tune into the radio station you desire (Refer to

the “MANUAL TUNING” or “AUTO TUNING”

section).

Press the MEMORY button on the front panel.

“– –“ (preset number) starts blinking on the

display.

Select the preset number by pressing the

TUNING/PRESET 3 or 4 buttons, while this

indicator is still blinking (approx. 5 seconds)

Press the MEMORY button again to enter. The

display stops blinking.

The station is now stored in the specified

preset memory location.

(Using the remote controller)

Tune into the radio station you desire (Refer to

the “MANUAL TUNING” or “AUTO TUNING”

section).

Press the MEMO button on the remote

controller. “– –“ (preset number) starts blinking

on the display.

Enter the desired preset number by pressing

the numeric buttons.

Note:

When entering a single digit number (2 for example),

either input “02” or just input “2” and wait for a few

seconds.

RECALLING A PRESET STATION

DISP AUTO TUNED ST

SLEEP DIRECT

1. 1.

(Using the unit)

Select the desired preset station by pressing

the F/P button and TUNING/PRESET 3 or 4

buttons on the front panel

(Using the remote controller)

Press the 1 or 2 buttons to select the desired

preset station, or input your desired preset

channel with the numeric buttons on the

remote controller.

PRESET SCAN

(Using the remote controller)

Press the P.SCAN button on the remote

controller.

“PRESET SCAN” appears on the display and

then the preset station with the lowest preset

number is recalled ﬁ rst.

Preset stations are recalled in sequence (No.1

→ No.2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

You can fast forward the preset stations by

pressing the 2 button continuously.

When the desired preset station is received,

cancel the preset scan operation by pressing

the CLEAR button or P.SCAN button on the

remote controller.

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory

using the following procedure.

3.2.

Recall the preset number to be cleared with

the method described in “Recalling” a preset

station.

Press the MEMORY button on the front panel

or press the MEMO button on the remote

controller.

The stored preset number blinks in the display

for 5 seconds. While blinking, press the

CLEAR button on the front panel or the remote

controller

“xx CLEAR” appears on the display to indicate

that the specified preset number has been

cleared.

Note:

To clear all stored preset stations, press and hold the

CLEAR and the F/P buttons on the front panel for

two seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5023 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR5023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info