Bedienungsanleitung Marantz SR6003 (Seite 19 von 90) (Englisch)

61897

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

BASIC OPERATION

AMP OPERATION

TURNING ON THE UNIT

Connect the AC power cable to the wall outlet.

Turn the power of the equipment connected to

this unit on.

Press the POWER ON/STANDBY button of

this unit. Every time the button is pressed,

the power to this unit toggles between on and

standby.

To activate power using the remote controller,

press the AMP button, followed by the ON

button and SOURCE ON/OFF button of the

remote controller.

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must

ﬁ rst select the input source on the unit.

Example : DVD

To select DVD, turn the INPUT SELECTOR knob

on the front panel or press the DVD button on the

remote controller two times in a row. After you have

selected DVD, simply turn on the DVD player and

play the DVD.

• As the input source is changed, the new input

name will appear momentarily an OSD information

on the video display. The input name will also

appear in the display, on the front-panel.

• If you use the FUNCTION RENAME feature (see

page 28) , the renamed name appears on the

display.

• As the input is changed, this unit will automatically

switch to the digital input, surround mode,

attenuation, and night mode status which were

entered during the conﬁ guration process for that

source.

• When a video source is selected, the selected

video signal is output from the MONITOR OUT

terminal.

ADJUSTING THE MAIN VOLUME

Adjust the volume to a comfortable level using

the VOLUME control knob on the front panel or

VOLUME + / – buttons on the remote controller.

To increase the volume, turn the VOLUME knob

clockwise or press VOLUME + button on the

remote controller, to decrease the volume, turn

counterclockwise or press VOLUME – button on the

remote controller.

Notes:

• The volume can be adjusted within the range of – ∞

and –71 to 18 dB, in steps of 1 dB.

•

However, when the channel level is set as described on

page 34, if the volume for any channel is set at +1 dB

or greater, the volume cannot be adjusted up to 18 dB.

(In this case the maximum volume adjustment range

is “18 dB - Maximum value of channel level)

ADJUSTING THE TONE (BASS & TREBLE)

CONTROL

During a listening session you may wish to adjust the

Bass and Treble Control to suit your listening tastes

or room acoustics.

(Using the remote controller)

adjust the tone

, press the AMP button.

To adjust the bass effect, press BASS + or BASS

–

button

To adjust the treble effect, TREBLE + or TREBLE

–

button

Notes:

• The tone control function is unavailable for the

Source Direct, Pure Direct, Headphone, Dolby

Virtual Speaker mode, and 176.4/192kHz PCM.

• The Tone control function is not available when M-

DAX is being used.

• The tone control function is not available when

ACOUSTIC EQ is being used.

• Additionally, tone control is not available during

Dolby TrueHD, Dolby Digital Plus, or DTS-HD

playback.

TEMPORARILY TURNING OFF THE SOUND

To temporarily silence all speaker outputs such as

when interrupted by a phone call, press the MUTE

button on the remote controller.

This will interrupt the output to all speakers and the

head-phone jack, but it will not affect any recording or

dubbing that may be in progress.

When the system is muted, the display will show

“MUTE” .

Press the MUTE button again to return to normal

operation.

TUNER OPERATION

To operate the unit from the remote controller, press

the TUNE button on the remote controller so that the

tuner mode is engaged.

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.

Default setup is 10 kHz step, if your country’s

standard is 9 kHz step, Press BAND button on the

front panel or BAND button on the remote controller

more than 5 seconds. Scan step will change.

Note:

•

Preset memory for the tuner will clear by changing

this setup.

AUTO TUNING

1. 2.3.

(Using the unit)

Turn the INPUT SELECTOR knob to select

“TUNER”.

Press the BAND button to select either FM or

AM.

Press the 3 or 4 cursor buttons on the front

Panel for more than 1 second to start the auto

tuning function.

Automatic searching begins then stops when a

station is tuned in.

SR6003_U_01_ENG 1_4.indd 16SR6003_U_01_ENG 1_4.indd 16 08.8.1 1:06:34 PM08.8.1 1:06:34 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR6003 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR6003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info