Bedienungsanleitung Marantz SR6003 (Seite 74 von 90) (Englisch)

61897

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

ADVANCED

OPERATION

MACRO MODE

PROGRAMMING MACROS

Macros make it possible to use a single function button

to perform more complex series of operations that

would normally require pressing several buttons.

A single MACRO can be programmed to perform up

to 10 steps in sequence.

A typical example of such a series might be as

follows:

• Turn this unit’s power on

↓

• Switch this unit's input source to DVD

↓

• Turn the TV’s power on

↓

• Set the DVD player to play.

• No signals may be transmitted during macro

programming.

• The various steps that make up a macro are

set initially to be sent one after another in 1

second intervals, however these intervals may be

shortened to as little as 0.5 seconds or lengthened

to as much as 5 seconds using the setup mode.

• In the macro mode, the number of steps the macro

is displayed with Macro list number.

• Macros may be programmed 6 list.

MACRO button + numeric button (Example :

Macro list No.1 → MACRO button + “1”)

Program method of MACRO

Press and hold the SET and MACRO button

until the LEARN, MACRO indicators and

MACRO are displayed blinking on the LCD.

Press the numeric button for which you wish to

program a series of operations.

Press the 1 button.

• “M1-01” is displayed on the LCD.

• If selected macro number has already been

set the program, the LCD will blink.

Press the function buttons and command

button for the operations you wish to program

as a macro in the sequence.

For example, press DVD button and PLAY

button.

Press DVD Button (DVD Function)

↓

Press PLAY Button (Fixed 1st step)

• The number of steps in the macro is displayed on

LCD and this number increases by 1 with each

button pressed.

• Each macro number can be programmed to

perform up to 10 steps in sequence.

Note:

When programing the ampliﬁ er's input source in the

macro program, ﬁ rst press the AMP button, and press

the source button.

(In the case of DVD input: AMP → DVD)

When you are ﬁ nished programming macros,

press and hold the ENTER button until the

display returns to normal mode (Turn off the

LEARN and MACRO indicators) .

• In the macro mode, it is possible to program

the memory to perform macros containing

up to 10 steps.

• Macros cannot be programmed for the

MEMO, cursor, ENTER, VOLUME+/- and

CL buttons.

Note:

If, while programming, no buttons are pressed for

approximately 1 minute, the remote controller will

automatically return to normal mode, and no macro

will be programmed in the memory.

CONFIRMING MACROS

Macros may be confirmed using following

procedure.

Press and hold the MACRO and MENU

buttons until the LEARN, MACRO indicators

and MACRO are displayed blinking on the

LCD.

Press the numeric button to be conﬁ rmed.

Let’s use the example of macro number 1, by

pressing “1” button.

• LEARN, MACRO indicators and M1-01 are

displayed blinking.

Press the VOLUME button.

• M1-01 is displayed and LEARN is

disappeared.

• The programmed operation is transmitting.

SR6003_U_01_ENG 3_4.indd 71SR6003_U_01_ENG 3_4.indd 71 08.8.1 1:08:14 PM08.8.1 1:08:14 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR6003 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR6003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info