Bedienungsanleitung Marantz SR6006 (Seite 110 von 153) (Englisch)

522826

110

Zoom out

Zoom in

Vorherige Seite

1/153

Nächste Seite

107

Network Setup

Default settings are underlined.

Make network settings.

Setting items Setting details

Network Connecting

Make settings for wired

LAN.

Only set “Network Connecting” when connecting to a network without a

DHCP function.

Detail

Exit

NETWORK CONNECTING

DHCP

IP Address

OFF

192.168.0.1

Enter

Set IP address and proxy manually

Exit

Proxy

NETWORK CONNECTING

DHCP

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

192. 168. 000. 001

255. 255. 255. 000

000. 000. 000. 000

OFF

RETURN

Cancel

Set IP address manually

q On the menu, select “Network Connecting” –

“Detail” and press ENTER.

w Use uio p to set “DHCP” to “OFF”, then

press ENTER.

The DHCP function is disabled.

SYSTEM SETUP

Setting items Setting details

Network Connecting

(Continued)

e Use uio p to input the address and press ENTER.

•IP Address : Set the IP address within the ranges shown below.

The Network Audio function cannot be used if other IP addresses

are set.

CLASS A: 10.0.0.1 – 10.255.255.254

CLASS B: 172.16.0.1 – 172.31.255.254

CLASS C: 192.168.0.1 – 192.168.255.254

•Subnet Mask : When connecting an xDSL modem or terminal

adapter directly to this unit, input the subnet mask indicated in

the documentation supplied by your provider. Normally input

255.255.255.0.

•Default Gateway : When connected to a gateway (router), input its

IP address.

•Primary DNS, Secondary DNS : If there is only one DNS address

indicated in the documentation supplied by your provider, input it at

“Primary DNS”. If there are two or more DNS addresses, input the

ﬁrst one at “Secondary DNS”.

r Use i to select “Exit” and press ENTER.

Setup is complete.

•When connecting to the network via a Proxy server, select “Proxy” and

press

ENTER (vpage108 “Proxy settings”).

•If you are using a broadband router (DHCP function), there is no need

to make the settings at “IP Address” and “Proxy”, since the DHCP

function is set to “ON” in this unit’s default settings.

•If this unit is being used connected to a network without the DHCP

function, the network settings must be made. In this case, some

knowledge of networks is required. For details, consult a network

administrator.

•If you cannot connect to the Internet, recheck the connections and

settings (vpage19).

•If you do not understand about Internet connection, contact your ISP

(Internet Service Provider) or the store from which you purchased your

computer.

•When you want to cancel the setting during IP address input, press

RETURN.

Basic version

Advanced version

Information

Advanced version

vSee overleaf

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR6006 Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR6006

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info