Bedienungsanleitung Marantz SR7002 (Seite 14 von 94) (Englisch)

62166

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

ENGLISH

REMOTE CONTROL

OPERATION (RC8001SR)

NAME AND FUNCTION

The provided remote controller is a universal

remote controller. The POWER button, numeric

buttons and control buttons are used in common

across different input source components.

The input source controlled with the remote controller

changes when one of the input selector buttons is

pressed.

z Infrared Transmitter and Learning

Sensor

This transmitter emits infrared light. Press the buttons

while pointing the transmitter towards the infrared

receiver window of the unit or other AV equipment.

Be sure to also point towards other remote controls

when using the learning function.

x POWER ON and OFF buttons

(When AMP mode is selected)

These buttons are used to turn the unit on or off.

c SOURCE ON/OFF button

This button is used to turn a speciﬁ c source (such as

a DVD player) on or off independently from the rest

of the system.

v M (Mode) button

This button is used to program Macros. Pressing this

button switches between Normal mode and Macro

mode.

The > button is used to move to the next page. Up to

20 programs (4 pages) can be made. Holding down

the M button for three seconds or more switches to

the Setup mode, where the Setup menu is shown on

the LCD. The Setup menu has four pages, and the >

button is used to move to the next page. Pressing the

> button from page 4 returns you to page 1.

b D1 to D5 (Direct) buttons

Five types of direct operations can be performed

for each of the 12 source buttons such as the DVD,

television, ampliﬁ er, and other AV equipment. The

pages can be switched, so 4 pages × 5 types = 20

operations can be performed for a single source. The

text display can also be changed.

n > (Page) button

This button is used to switch pages for the Direct

button. The current page is shown on the LCD.

m VOL (Volume) button

This button is used to adjust the volume for the

ampliﬁ er and television.

Note:

• Set the AMP mode to use this button with the unit.

2 31

5 64

MEMO

CLEAR

DSS

AMP

AUX2

AUX1

TA PE

TUNER

CD-R

VCRDVD

SOURCE

OFF

ON/OFF

POWER

VOL

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP·SYNC

THX

SURR

7.1CH

AT T

SPK-AB

DISP

OSD

SLEEP

LIGHT

Learning Remote Controller

RC8001SR

⁄1

⁄2⁄6

⁄7

⁄8

⁄9

¤0

¤1

⁄3

⁄4

⁄5

⁄0

@0 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

@1 AUDIO IN/OUT (TV, DVD, VCR1,

DSS/VCR2, TAPE, CD/CDR)

These are the analog audio inputs and outputs.

There are 6 audio inputs and 4 audio outputs. The

audio jacks are nominally labeled for cassette tape

decks, compact disc players, DVD players and etc....

The audio inputs and outputs require RCA-type

connectors.

@2 DIGITAL INPUT (Dig.1 - 6) /

OUTPUT (coaxial, optical)

These are the digital audio inputs and outputs. There

are 3 digital inputs with coaxial jacks, 3 with optical

jacks.

The inputs accept digital audio signals from a

compact disc, LD, DVD, or other digital source

component.

For digital output, there is 1 coaxial output and 1

optical output.

The digital outputs can be connected to MD

recorders, CD recorders, DAT decks, or other similar

components.

VIDEO IN/OUT

(TV, DVD, VCR1, DSS/VCR2)

These are the video inputs and outputs. There

are 4 video inputs and 2 video outputs and each

one includes both composite video and S-video

conﬁ gurations. Connect VCRs, DVD players, and

other video components to the video inputs.

The 2 video output channels can be used to be

connected to video tape recorders for making

recordings.

@4 HDMI INPUT / OUTPUT

This unit has 4 HDMI inputs and 2 HDMI output. The

input function can be selected from the OSD menu

system. (See page 43)

, MUTE button

This button is used to mute the audio for the ampliﬁ er

and television.

Note:

• Set the AMP mode to use this button with the unit.

. GUIDE button

This button is used to display the menus for the DVD

player, DSS (satellite broadcasting tuner), or other

AV equipment.

(when AMP mode is selected)

This button is used to select the LIP.SYNC mode.

⁄0 EXIT button

(when AMP mode is selected)

This button is used to cancel settings in the setup

menu.

⁄1 Numeric buttons

These buttons are used to switch between 0 to 9

of the source components. If the source is set to

the amplifier, these buttons are used to perform

operations.

(when AMP mode is selected)

(1) TEST button

This button is used to enter the test tone menu.

(2) CH SEL. (channel select) button

This button is used to call up SETUP MAIN MENU

and adjust speaker levels or 7.1 ch input level.

(3) SURR (surround) button

This button is used to select the surround mode.

(4) 7.1CH button

This button is used to select the output of an external

multi channel decoder.

(5) ATT button

When the input signal is too high and the voice

distorts even by throttling the unit VOLUME control,

turn on this function. “ATT” is indicated when this

function is activated.

The input level is reduced. Attenuator is invalid for

use with the output signal of “REC OUT”.

Note:

• This function is unavailable during the digital input

is selected.

(6) SPK-AB button

Speaker mode is switched in the following

sequence.

A → B → A+B → off

SR7002-8002_U_01_ENG 1_3.indd 11SR7002-8002_U_01_ENG 1_3.indd 11 07.8.24 1:14:46 PM07.8.24 1:14:46 PM

Marantz SR7002 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR7002

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info