Bedienungsanleitung Marantz SR7005 (Seite 62 von 128) (Englisch)

453910

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA

Convenient functions

Sleep timer function

The power automatically goes into standby once the set time has

elapsed.

This is convenient for playing sources while going to sleep.

Press AMP to set the remote

control unit to amplier operation

mode.

Press SLEEP and display the time

you want to set.

The indicator on the display lights.

• If SLLEP on the main unit is pressed,

the same function as with the remote

control unit can be obtained.

• The time switches as shown below each time

SLEEP is pressed.

OFF 10 min 20 30 40 50

6080 7090100

110

120

To cancel the sleep timer

Press SLEEP to set “OFF”.

The indicator on the display turns off.

• The sleep timer setting is canceled if this unit’s power is set to

standby or turned off.

• When power to the main zone is turned off with the sleep timer,

power in ZONE2 and ZONE3 are also turned off.

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback

sources or to suit your taste, as described below.

n Adjusting the volume of the different speakers

Press AMP to set the remote

control unit to amplier operation

mode.

Press CH LVL.

Front L

Front R

Center

Subwoofer

Surround L

Surround R

S.Back L

S.Back R

Fader

0.0dB

CHANNEL LEVEL

Select

Front Rear

Use ui to select the speaker.

The speaker that can be set switches each time one of the

buttons is pressed.

Use o p to adjust the volume.

• In the case of a subwoofer, pressing o when it is at “–12 dB” will

change the setting to “OFF”.

• When a headphone jack is inserted, the headphone channel level

can be adjusted.

• When the input mode setting is “7.1CH IN”, you can adjust the

channel level while the 7.1CH INPUT connector is being used. In

that case, “7.1CH IN Level” appears at the top of the screen.

n Adjusting the volume of groups of speakers

(Fader function)

This function lets you adjust (fade) the sound all at once from the

front (front speaker / front height speaker / front wide speaker /

center speaker) or rear (surround speaker / surround back speaker).

Press AMP to set the remote

control unit to amplier operation

mode.

Press CH LVL.

Front L

Front R

Center

Subwoofer

Surround L

Surround R

S.Back L

S.Back R

Fader

0.0dB

CHANNEL LEVEL

Select

Front Rear

Press i to select “Fader”, then select the item to be

adjusting using o p.

Use o p to adjust the volume of the speakers.

(o : front, p: rear)

• The fader function does not affect the subwoofer.

• The fader can be adjusted until the volume of the speaker is adjusted

to the lowest value of –12 dB.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR7005 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR7005

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info