Bedienungsanleitung Marantz SR7400 (Seite 11 von 52) (Englisch)

6596

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

LCD INDICATORS

Information about currently selected source and

direct code names are displayed on the LCD.

A Source Name indicator

This displays the name of the selected source,

such as DVD, television, or other AV equipment

(up to five characters).

B Direct Button Name indicator

This displays up to 20 types of button names for

each source. (up to six characters)

C Page indicator

This displays the current page position.

D Transmission indicator

This lights up when the remote control is sending a

signal.

E USE indicator

This is displayed under normal operation.

F Battery Level indicator

This is displayed when the battery level is low.

G TIMER indicator

This is displayed when the macro timer is set.

H MACRO indicator

This is displayed when the remote control is in

macro programming mode.

LEARN

NAME

MACRO

USE

PAG E

123

, MUTE button

This button is used to mute the audio for the

SR7400 and television.

Note:

• Set the AMP mode to use this button with the

SR7400.

. GUIDE button

This button is used to display the menus for the

DVD player, DSS (satellite broadcasting tuner), or

other AV equipment.

⁄0 EXIT button

(when AMP mode is selected)

This button is used to cancel settings in the setup

menu.

⁄1 Numeric buttons

These buttons are used to switch between 0 to 9 of

the source components. If the source is set to the

amplifier, these buttons are used to perform

operations.

(when AMP mode is selected)

(1) TEST button

Used to enter the test tone menu.

(2) CH SEL. (channel select) button

Used to call up SETUP MAIN MENU and adjust

speaker levels or 7.1 ch input level.

(3) SURR (surround) button

Used to select the surround mode.

(4) 7.1CH IN button

Press this button to select the output of an external

multi channel decoder.

(5) ATT button

When the input signal is too high and the voice dis-

torts even by throttling the SR7400 VOLUME con-

trol, turn on this function. “ATT” is indicated when

this function is activated.

The input level is reduced. Attenuator is invalid for

use with the output signal of “REC OUT”.

Note:

• This function is unavailable during the digital

input is selected.

(6) SPK-AB button

Speaker mode is switched in the following

sequence.

A → B → A+B → off

(7) DISP. button

Selects the display mode for the front display of the

SR7400.

(8) OSD button

When this button is pressed, the current setting are

displayed on the TV monitor.

(9) SLEEP (sleep timer) button

This button is used for setting the sleep timer. It

can be operated the same way as the button in unit.

⁄2 MEMO button

This button is used to store settings to memory or

program a source.

⁄3 CONTROL button

Thses buttons are used when operating the PLAY,

STOP, PAUSE, and other commands of a source.

Note:

• This button is unavailable for the SR7400.

⁄4 SOURCE button

Thses buttons are used to switch the source of

your A/V Receiver / amplifer. Each time a source

button is pressed, the remote control changes to

the source which was pressed.

This remote control can control 12 types of

equipment. To change the A/V Receiver / amplifier

source, press this button twice within two seconds.

The signal is sent when it is pressed the second

time.

Note:

• Select the AMP as the source to use this remote

controll with the SR7400.

⁄5 LIGHT 1 and 2 buttons

Pressing these buttons will light up the LCD and its

buttons. This lighting time can be set. If the lighting

time is set to 0 seconds, the backlight turns on only

while this button is pressed. The operations for

LIGHT 1 and 2 are identical.

⁄6 CLEAR button

This button is used to erase the memory or

program of a source.

⁄7 MENU button

(when AMP mode is selected)

This button is used to call up the SETUP MAIN

MENU of the SR7400.

⁄8 PREV (Previous) button

This button is used to return to the previous

channel on the television or other device.

Note:

• This button is unavailable for SR7400.

⁄9 CH (Channel) button

This is used to change channels.

¤0 CURSOR buttons

These buttons are used when controlling the

cursor of the SR7400, DVD, or other AV

equipment.

¤1 LCD

Information about the sources and modes are

shown on the LCD.

SR7400U DFU_01_ENG 1_2 03.10.13, 9:24 AMPage 8 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR7400 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR7400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info