Bedienungsanleitung Marantz st 4000 (Seite 4 von 9) (Englisch)

161409

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

ENGLISHFRANçaISDEUTSCH

NEDERLANDS

ESPAÑOLITALIANOPORTUGUÊSSVENSKADANSK

OPERATIONS

HOW TO ADJUST CURRENT TIME

You can adjust the current time even if the system power is off.

Time adjustment (for example: 11:35)

1. Press the TIME ADJUST button. (Clock section will be shown on

the display.)

2. Set hour (11) by pressing the TUNING (▼/▲) buttons.

3. Press the NEXT button. (Minutes signal blinks on the display.)

4. Set minute (35) by pressing the TUNING (▼/▲) buttons.

5. Pressing the TIME ADJUST button or NEXT button completes the

adjustment.

HOW TO PRESET BROADCASTS

Press the BAND button to select the broadcast band.

Manual Memory Presetting

1. TUNING

Select the broadcast frequency you want to memorize by pressing

the TUNING UP/DOWN button.

2. PRESET CALL

Press the MEMO button briefly (for 0.5 second or less).

Select the channel you want by pressing the PRESET UP/DOWN

button while the “MEMORY” indicator lamp is blinking.

3. MEMORY

Press the MEMO button to memorize the broadcast.

• You can preset up to 30 FM and 30 AM (MW) channels.

Automatic Memory Presetting

1. MEMORY

Press the MEMO button for long (for more than 0.5 second).

Whenever the next highest broadcast frequency is selected, the

selected broadcast is preset automatically.

2. PRESET CALL

Check the preset broadcast by pressing the PRESET UP/DOWN but-

ton.

NOTES:

• In FM Automatic Memory Presetting, frequency is automatically

memorized. The setting which has better reception will be preset first.

• If the new broadcast channel is preset to a channel, the channel which

had been preset to that position earlier will be automatically erased.

• It is impossible to preset automatically in areas far away from the broad-

cast station or in mountain areas where received signals are weak.

HOW TO MEMORIZE BROADCASTING STATION

NAME

If only a frequency is preset, fill in the station name using manual or

automatic memory presetting.

(Example) FM 98.80 MHz 3ch, Station name: BBC 1

1. Press the BAND button.

Select the FM band.

2. TUNING

Set 98.80 MHz by pressing the TUNING button.

3. ST. NAME

Press the ST. NAME button.

“---” or the station name preset last will be shown on the display.

Preset the station name, “BBC 1”.

(1) B ﬁ B ---: after setting “B” by pressing the TUNING button

when the first signal blinks, press the NEXT button.

(2) Preset “B, B, C, 1” as in step (1) above.

4. MEMORY

Press the MEMO button briefly (0.5 second or less).

(The “MEMORY” indicator blinks.)

5. PRESET CALL

After setting “03” by pressing the PRESET UP/DOWN button, press

the MEMO button briefly once more.

• BBC1 FM 98.80 MHz 03 has been just preset.

NOTES:

• File content: A, B, C

…

X, Y, Z (alphabet)

0, 1,

…

8, 9 (number), blank

• Current time will not be displayed if the station name has already

been preset.

HOW TO USE SLEEP FUNCTION

Sleep programming is used to preset the time to turn off system power

while listening to music.

1. Press the SLEEP button.

“SLEEP 120” is shown on the front display.

2. Each press of the button changes the time indication by 10 min-

utes.

(Released condition)

ﬁ SLEEP 120 ﬁ SLEEP 110 ﬁ

…

ﬁ SLEEP 010 ﬁ SLEEP

…

If you press the TUNING UP/DOWN button after pressing the SLEEP

button, you can adjust the time by one minute at a time.

3. Five seconds after presetting the sleep time, the system will return

to the previous status and thereafter begin sleep timing.

To cancel the SLEEP (timer), turn the power off.

NOTES:

• If you want to know the time remaining until the sleep time, press

the SLEEP button once.

• To allow the sleep function to work properly, you need to connect

the remote control terminal of the tuner to the corresponding re-

mote control terminal of the amplifier.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz st 4000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info