6618
9
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
ENGLISH
6
SETUP
PLC SETTING
RECALIBRATION
If audio is lost when the ZC4001 and ZR6001 are
connected over a PLC connection, recalibrate the
signal to the best carrier frequency.
The ZR6001 is set first.
<ZR6001>
Using the OSD menu system, set MULTI PLC
SERVER to ON.
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1.
Select 9. MULTI PLC in the SETUP MAIN
MENU with the
or cursor buttons, and
press the ENTER button.
2.
Select MULTI PLC SERVER with the or
cursor buttons. And select ON with the or
cursor buttons.
For details, see page 24 in the ZR6001 Users
Guide.
<ZC4001>
1.
Press and hold the ENTER button for 5 sec. or
more.
2.
Press the ENTER button.
3.
The below message appears when
recalibration is complete.
SET GROUP ID
To set a Group ID, connect the AC power cables of
the ZC4001 and ZR6001 to wall power outlets as
close to each other as possible.
Set the Group ID simultaneously for the ZC4001
and ZR6001.
<ZR6001>
Using the OSD menu system, set GP-ID
SETTING to START.
ZR6001 ON SCREEN DISPLAY MENU SYSTEMZR6001 ON SCREEN DISPLAY MENU SYSTEM
ZR6001 ON SCREEN DISPLAY MENU SYSTEMZR6001 ON SCREEN DISPLAY MENU SYSTEM
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1.
Select 9. MULTI PLC in the SETUP MAIN
MENU with the
or cursor buttons, and
press the ENTER button.
2.
Select GP-ID SETTING with the or
cursor buttons.
<ZC4001>
1.
Press and hold the ENTER button for 5 sec. or
more.
2.
Press the button once.
1. 2.
1
.
1. 3. 2.
1
.
3.
Simultaneously press the ENTER buttons of
the ZR6001 and ZC4001.
<ZR6001>
GP-ID SETTING : **
<ZC4001>
The below message appears when the Group ID
has been successfully set.
<ZC4001>
<ZR6001>
GP-ID SETTING : SUCCEED
The below message appears if the units fail to set
the Group ID.
<ZC4001>
<ZR6001>
GP-ID SETTING : MISSING
Notes:
One possible reason the Group ID cannot be set is
power line noise. In that case, unplug the power
cable of the device that is generating noise, then
plug it back in and try setting the Group ID again.
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP
ID SETTING:START
MA I N EX I T
PLC SERVER:ON
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP
ID SETTING:START
MA I N EX I T
PLC SERVER:ON
ZC4001U DFU_01_ENG 06.3.30, 9:10 AMPage 6 Adobe PageMaker 6.5J/PPC
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantz ZC-4001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info