ENGLISH
7
u
AC INLET
Plug the supplied power cord into this AC INLET
and then into the power outlet on the wall.
ZR6001 can be powered by 120V AC only.
i
Multiroom Fixed OUTPUT
These are the audio output jacks for the Multi zone
(Multi room).
Volume is fixed and cannot be changed.
o
IR EMITTER OUT (1-4)
Connect to an IR emitter. These terminals output
remote control signals from the ZC4001 over the
power line to control sources via the Multi PLC
feature.
!0
AC OUTLETS
Connect the AC power cables of components such as
a DVD and CD player to these outlets. SWITCHED
and UNSWITCHED outlets are provided.
The one marked SWITCHED provides power only
when the ZR6001 is turned on and is useful for
components which you use every time you play
your system.
The one marked UNSWITCHED is always live as
long as the ZR6001 is plugged into a live outlet.
A component connected here may be left on
permanently, or may be switched off with via its
own power switch.
Caution:
•
In order to avoid potential turn-off thumps,
anything plugged into these outlets should be
powered up before the ZR6001 is turned on.
• The capacity of this AC outlet is 120W. Do not
connect devices that consume electricity more
than the capacity of these AC outlets. If the total
power consumption of the connected devices
exceeds the capacity, the protection circuit shuts
down the power supply.
!1
Speaker outputs terminals
Seven terminals are provided for the front left, front
right, front center, surround left, surround right,
surround back left and surround back right speakers.
Note:
• You can use surround back speaker terminals as
M (Multiroom) SPEAKER B terminals, when you
use no surround back speaker.
!2
Subwoofer Output
Connect this jack to the line level input of a powered
subwoofer. If an external subwoofer amplifier is used,
connect this jack to the subwoofer amplifier input. If
you are using two subwoofers, either powered or with
a 2 channel subwoofer amplifier, connect a “Y ”
connector to the subwoofer output jack and run one
cable from it to each subwoofer amplifier.
!3
7.1 CHANNEL or AUX2 INPUT
By connecting a DVD Audio player, SACD
multichannel player, or other components that has
a multichannel port, you can playback the audio
with 5.1 channel or 7.1 channel outputs.
!4
FLASHER IN (Flasher input terminal)
These terminals are for controlling the unit from
each room using a keypad, etc.
!5
Multiroom Outputs (Audio L&R)
These are the audio output jacks for the Multi zone
(Multi room).
Connect these jacks to optional audio power
amplifiers to listen the source selected by the
multiroom system in a remote room.
!6
MULTI ROOM REMOTE IN/OUT terminals
I Connect to a multi-room remote control
device, available from your Marantz dealer.
OUT: Connect to the Marantz component
equipped with remote control (RC-5)
terminals in Multi zone (Multi room).
!7
REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with
remote control (RC-5) terminals.
!8
AUDIO IN/OUT (CD, TAPE, CD-R, TV,
DVD, VCR1, DSS/VCR2)
These are the analog audio inputs and outputs.
There are 7 audio inputs (4 of which are linked to
video inputs) and 4 audio outputs (2 of which are
linked to video outputs). The audio jacks are
nominally labeled for cassette tape decks,
compact disc players, DVD players and etc.... The
audio inputs and outputs require RCA-type
connectors.
!9
DIGITAL INPUT (Dig.1 - 4) / OUTPUT
(coaxial, optical)
These are the digital audio inputs and outputs.
There are 2 digital inputs with coaxial jacks, 2 with
optical jacks.
The inputs accept digital audio signals from a
compact disc, LD, DVD, or other digital source
component.
For digital output, there is 1 coaxial output and 1
optical output.
The digital outputs can be connected to MD
recorders, CD recorders, DAT decks, or other
similar components.
REAR PANEL
r
COMPONENT VIDEO INPUT/OUTPUT
If your DVD player or other device has component
video connectors, be sure to connect them to
these component video connectors on the
ZR6001. The ZR6001 has two component video
input connectors to obtain the color information (Y,
C
B
, C
R
) directly from the recorded DVD signal or
other video component and one component video
output connector to output it directly into the matrix
decoder of the display device.
By sending the pure DVD component video signal
directly, the DVD signal forgoes the extra
processing that normally would degrade the
image. The result is vastly increased image
quality, with incredibly life like colors and crisp
detail.
When the video convert function is enabled, video
and S-video images can be output to the
COMPONENT MOINTOR OUT jack.
t
MONITOR OUT
This is a monitor output and each one includes
both composite video and S-video configurations.
When connecting two video monitors or
televisions, be aware that the OSD interface can
be used with both MONITOR OUT connections.
y
Preamp Outputs
(L, R, SL, SR, SBL, SBR, C)
Jacks for L(front left), R (front right), C (Center), SL
(surround left), SR (surround right), SBL (surround
back left) and SBR (surround back right).
Use these jacks for connection to external power
amplifiers.
q
VIDEO IN/OUT (TV, DVD, VCR1, DSS/VCR2)
These are the video inputs and outputs. There are
4 video inputs and 2 video outputs and each one
includes both composite video and S-video
configurations. Connect VCRs, DVD players, and
other video components to the video inputs.
The 2 video output channels can be used to be
connected to video tape recorders for making
recordings.
The input signals of video and S-video are
converted each other, and each of the converted
video signals can be output.
w
FM antenna terminal (75 ohms)
Connect an external FM antenna with a coaxial
cable, or a cable network FM source.
AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the
terminals marked “ AM” and “ GND” . The supplied
AM loop antenna will provide good AM reception in
most areas. Position the loop antenna until you
hear the best reception.
e
RS-232C
The RS-232C port is to be used in conjunction with
an external controller to control the operation of the
ZR6001 by using an external device.
SPEAKER SYSTEMS : MINIMUM 6 OHMSSPEAKER SYSTEMS : MINIMUM 6 OHMS
FRONTFRONT CENTERCENTER SURROUNDSURROUND SURROUND BACKSURROUND BACK
M. SPEAKER BM. SPEAKER B
MULTIMULTI
OUTOUT
TVTV DVDDVD
CC
ININ OUTOUT
S-VIDEOS-VIDEO
DVDDVD
DSS/VCR2DSS/VCR2
CC
RS-232CRS-232C
RCRC
MULTIMULTI
ININ OUTOUT
DSS/VCR2DSS/VCR2
ININ OUTOUT OUTOUT
VCR1VCR1
VCR1VCR1
LL
SBRSBR
SBLSBL
OUTOUT
PREPRE
SLSLLL
SRSRRR
DSS/VCR2DSS/VCR2DVDDVDTVTV
RR
ININ
RR SWSW
RC-5RC-5
ININ
SRSR
AUDIOAUDIO
7.1CH7.1CH
ININ
OUTOUT ININ
LL SLSL
SBRSBR
SBLSBLCDCD
ININ OUTOUT
SWSW
OUTOUT
CDR/MDCDR/MDTAPETAPE
OUTOUTININ
ININ OUTOUT
VIDEOVIDEO
MONITORMONITOR
VCR1VCR1
TVTV OUTOUT
((
AUX2AUX2
))
MONITORMONITOR
DIGITAL INDIGITAL IN DIGITAL OUTDIGITAL OUT
33
11 OPT.OPT.22
44
COAX.COAX.
RR LL LLRRRR LL
SWITCHEDSWITCHED UNSWITCHEDUNSWITCHED
1A 120W MAX1A 120W MAX 1A 120W MAX1A 120W MAX
FM FM
((
7575
ΩΩ
))
ANTENNAANTENNA
GNDGND AMAM
COMPONENT VIDEOCOMPONENT VIDEO
CCBB
//
PPBB
CCRR
//
PPRR
CCRR
//
PPRR
CCRR
//
PPRR
CCBB
//
PPBB
CCBB
//
PPBB
INPUT-1INPUT-1
YY YY
MONITOR OUTMONITOR OUTINPUT-2INPUT-2
YY
OUTOUT
AC OUTLETSAC OUTLETS
120V 60Hz120V 60Hz
AC INAC IN
IR EMITTER OUTIR EMITTER OUT
RR
11
LL
22 33 44
MULTI FIXED OUTMULTI FIXED OUT
ININ
FLASHERFLASHER
!2
!7
!6 !4 !3
tqw r y !0ei
!9 !8
!1
MODEL NO. ZR6001MODEL NO. ZR6001
ZR6001U DFU_01_ENG 1_2 06.3.6, 4:26 PM Adobe PageMaker 6.5J/PPC
