Bedienungsanleitung Marantz ZR-6001 (Seite 25 von 56) (Englisch)

6620

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

SUB W:

Set the distance from the subwoofer to your

normal listening position.

SURR. B L:

Set the distance from the surround back left

speaker to your normal listening position.

SURR. B R:

Set the distance from the surround back right

speaker to your normal listening position.

Notes:

• Set the distance to each speaker in meters (m) or

feet (ft) as follows.

m: 0.3 - 9 m in 0.3 m steps

ft: 1 - 30 ft in 1 ft steps

• For the speakers that you have selected “NONE”

the Speaker Size menu will not appear.

• The setting for Surr.Back L and Surr.Back R

appears if you set for it to, two surround back

speakers in the Speaker Size menu.

• The setting of Surr.Back appears if it is set for one

surround back speaker in the Speaker Size menu.

2-3 SPEAKERS LEVEL SETTING WITH TEST TONE

Here you will set the volume for each speaker so

that they are all heard by the listener at the same

level. We recommend using a SPL (Sound

Pressure Level) meter, when available.

Note:

• The speaker level settings are not available in 7.1

Channel Input mode, CS mode and Multi Channel

Stereo mode.

TEST MODE :

Selects “MANUAL” or “AUTO” for generating

the mode of the test tone with the or cursor

buttons.

If you select “AUTO” , the test tone will be cycled

through in a circular pattern which is Left →Center

→ Right → Surround Right → Surround Back Right

→ Surround Back Left → Surround Left →

Subwoofer → Left →.. increments of 2 seconds

for each channel.

Using the

or cursor buttons, adjust the volume

level of the noise from the speaker so that it is the

same level for all the speakers.

If you select “MANUAL”, adjust the output level of

each speaker as listed below.

When you move the cursor to FRONT L by

pressing the cursor button, the ZR6001 will

emit a pink noise from the front left speaker.

Remember the level of this noise and then

press the

cursor button.

(Note that this can be adjusted to any level

between -10 and +10 dB in 1 dB intervals

except the subwoofer setting. The subwoofer

can be adjusted to any level between -15 and

+10 dB in 1 dB intervals.)

The ZR6001 will now emit the pink noise from

the center speaker.

Using the and cursor buttons, adjust the

volume level of the noise from the center

speaker so that it is the same level as the front

left speaker.

Press the cursor button again. The ZR6001

will now emit the pink noise from the front right

speaker.

Repeat steps 2 and 3 above for the front right

and other speakers until all speakers are

adjusted to the same volume level.

After you complete this portion of the set up, press

the ENTER button, the cursor will move to “MAIN”

and then press the ENTER button to go to SETUP

MAIN MENU.

Notes:

• Speakers that you selected “NONE” for in the

Speaker Size menu will not appear.

• The setting of Surr.Back L and Surr.Back R

appears if you have set it for two surround back

speakers in the Speaker Size menu.

•

The setting of Surr.Back appears if you have set it for

one surround back speaker in the Speaker Size menu.

• To adjust the speaker levels for 7.1-channel input

sources, you will need to use the 7.1CH-INPUT

sub menu. (See page 24).

2-2 SPEAKERS DISTANCE

Use this parameter to specify the distance of each

speaker’s position from the listening position. The

delay time is automatically calculated according to

these distances.

Begin by determining the ideal or most commonly

used seating position in the room.

This is important for the timing of the acoustics to

create the proper sound space that the ZR6001

and today’s sound systems are able to produce.

Note:

• For speakers that you have selected “NONE” the

Speaker Configuration sub-menu will not appear

here. (There are several useful books and special

DVD and LD’s available to guide you through

proper home theater configuration. If you are

unsure, have your Marantz dealer perform the

installation for you. They are trained

professionals familiar with even the most

sophisticated custom installations. Marantz

recommends the WWW.CEDIA.ORG website for

further information about this).

To select each speaker , press the or

cursor buttons.

To set the distance for each speaker , press

the

or cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the

cursor buttons and then press the ENTER

button to go to the next page.

FRONT L:

Set the distance from the front left speaker to

your normal listening position.

Center:

Set the distance from the center speaker to your

normal listening position.

FRONT R:

Set the distance from the front right speaker to

your normal listening position.

SURR. L:

Set the distance from the surround left speaker

to your normal listening position.

SURR. R:

Set the distance from the surround right speaker

to your normal listening position.

3 PREFERENCE

Select “PREFERENCE” in the SETUP MAIN

MENU with the or cursor buttons, and

press the ENTER button.

To select a desired content, press the or

cursor buttons.

STANDBY MODE:

When this function is set to “ECONOMY”, you

can reduce the power consumption when the

unit is in the standby mode.

Note:

• TV-AUTO and RS-232C are disabled in the

“ECONOMY” setting.

TV AUTO:

Select the TV AUTO ON/OFF function to enable

or disable with the or cursor buttons. (refer

to page 31)

OSD Info:

Select the OSD information function to enable or

disable with the or cursor buttons.

If you select “ENABLE”, the ZR6001 will display

the status of the feature (Volume up/down, input

select, etc..) on the TV monitor. But if you do not

desire this information, select “DISABLE ”.

VIDEO CONVERT:

Select the VIDEO CONVERT function to enable

or disable with the or cursor buttons. (Video

cable connection: Refer to page 27)

After you complete this portion of the set up, move

the cursor to “MAIN” with the or cursor buttons

and press the

ENTER

button.

2 - 2 SPEAKERS D I STANCE

FRONT L : 10 f t 3 . 0 m

FRONT R : 10 f t 3 . 0 m

CENTER : 1 0 f t 3 . 0 m

SURR . L : 1 0 f t 3 . 0 m

SURR . R : 1 0 f t 3 . 0 m

SUB W : 10 f t 3 . 0 m

SURR . B L : 1 0 f t 3 . 0 m

SURR . B R : 1 0 f t 3 . 0 m

MA I N RETURN NEXT EX I T

2-3 SPEAKERS LEVEL

T EST MODE : MANUAL

FRONT L : 0 dB

CENTER : 0 dB

FRONT R : 0 dB

SURR . R : 0 dB

SURR . B R : 0 dB

SURR . B L : 0 dB

SURR . L : 0 dB

SUB W : 0 dB

MA I N RE T URN E X I T

3 PREFERENCE

S TANDBY MODE : ECONOMY

TV-AUTO :

✽✽✽

OSD I NFO : ENABLE

V I DEO CONVERT : ENABLE

MA I N E X I T

ZR6001U DFU_01_ENG 2_2 06.3.6, 4:28 PMPage 22 Adobe PageMaker 6.5J/PPC

Marantz ZR-6001 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info