640412
8
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
8
Mode of operation: Standard, without locomotive engineer.
Mode of operation: Semi-pro. The sand consumption is indicated and must be replenished
accordingly using the sanding station.
Mode of operation: Pro. The sand consumption is indicated and can be replenished
accordingly using the sanding station.
If the symbol for an engineer’s cab
iis activated, the CS screen switches to an
engineer‘s cab assigned to the locomotive. The locomotive is operated using ele-
ments on the screen and the two CS2 control knobs.
You can change between the engineer’s cab and the Control window at anytime. The
sand consumption continues to remain active.
Mode of operation: Specialist. If the symbol for the engineer’s cab
is activated, the CS
screen switches to an engineer‘s cab assigned to the locomotive. The locomotive is operated
using elements on the screen and the two CS2 control knobs.
For the last two locomotive engineer’s profiles mentioned above you can determine the location of a locomo-
tive refueling station (BW) using electrical contacts and a feedback module. 2 contacts per refueling station
must be present on the layout. The first contact is for requesting fuel and the 2nd contact is the locomotive
refueling facility that has been reached (diesel refueling station, sand bunker, coaling station, etc.).
Locomotive Engineer Proles and Their Symbols
The supplies must be replenished. This indicator only appears in the profiles for a pro and a specialist
locomotive engineer, when the indicator is activated by the contact on a feedback module. You have
to confirm with this button that you want to replenish to sand supply. This button
will then appear.
Requesting a locomotive refueling / replenishing facility. This button appears in the modes for pro and
specialist, when you press on the supplies indicator. It allows you to replenish the supply of sand.
Replenishing fuel and ending the refueling procedure.
Locomotive Servicing and Symbols
Symbol: Configuration
Symbol: Engineer’s cab
Symbol: Add fuel
Symbols in the Control Window
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marklin 37756 - Locomotive Dm wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Marklin 37756 - Locomotive Dm

Marklin 37756 - Locomotive Dm Bauanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info