601458
14
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
14
Procedure ffor EEntering tthe AAddress
1. Connect the Control Unit, Keyboard, and
transformer. Do not turn the Control Unit on yet.
2. Leave (!) the signal control module with the
home signal mast connected to it in its original
packaging. Connect only the brown and the
yellow wires from the signal control module to
the brown and red (!) terminal clips on the
Control Unit.
3. Set the Keyboard address to the desired
address. In our example (Keyboard No. 1)
all 4 coding switches at the "off" position.
4. Turn on the 6021 Control Unit. Press the
"stop" button.
5. Press the "go" button. The track block signal
will begin to switch between 2 signal aspects. If
the following step does not begin within several
seconds (approx. 30 sec.), the electronic circuit
will end the address setting process automati-
cally.
6. Press the green button on pair of buttons 3 of
the Keyboard, until all of the LED's on the home
signal light up. Only release the button at this
point.
7. Turn the Control Unit off. The signal and the
signal control module can now be installed on
the layout.
Note:
· For long breaks during programming, the sig-
nal terminates the programming mode without a
change. In this case, start from the beginning
again with the complete addressing procedure.
While addressing is taking place, ensure that
the breaks between the individual keyboard
commands are not too long.
· Once the programming has ended or has been
cancelled, the signal switches to demonstration
mode after a few seconds. In this mode, various
signal aspects of the respective signal type are
displayed.
- The control electronic circuit must be removed
from the packaging before testing the signal.
76371.qxd 16.04.04 16:24 Seite 14
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marklin Lichtafsluitsein 76371 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info