613367
6
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
© MARMITEK
6
PAIRING AND CONNECTING
The Bluetooth amplifier must be paired with your Bluetooth-enabled device in
order to be able to stream audio. To pair the amplifier, power up the amplifier
(with volume control). Then go to the wireless settings of your Bluetooth
device and select "Scan for Bluetooth devices". If in Windows, select "Add
New Device" in the Bluetooth tab.
Once the amplifier is shown as a headset with the name "BoomBoom 460",
confirm the pairing on your device. Next your Bluetooth device will
automatically connect to the amplifier. If it doesn‘t, manually select "Connect".
If streaming from Windows, note that Windows will install drivers during the
pairing. Manually connect to the amplifier by right-clicking the headset symbol
and selecting "Connect" if Windows does not connect automatically.
After the pairing is complete audio can be streamed to the amplifier from your
device.
RECONNECTING TO THE AMPLIFIER
If the amplifier or your device is switched off, the connection will be dropped.
When the amplifier is switched back on, it will automatically pair to the last
device it was connected. or.you can manually reconnect to the amplifier by
revisiting the Bluetooth settings of your device. Then simply select the
amplifier and select Connect". The audio streaming will resume. In Windows,
right-click the headset symbol and select "Connect".
POWER/ BLUETOOTH INDICATOR LED
The BoomBoom 460 has a multicolour indicator led. (red and green).
Red: power ON
Green: Bluetooth ON.
Red and green alternate flashing quick: Pairing mode.
Red and green alternate flashing slow: Bluetooth connection.
WIRED CONNECTION
This BoomBoom 460 can also be used as a conventional Wired Stereo
amplifier with Direct Line-In to your Panel TV or other Audio Devices simply
by connecting the 3.5mm Audio Cable from the rear of the BoomBoom 460 to
your Music Source.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marmitek BoomBoom 460 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info