4 © MARMITEK
The Marmitek products are manufactured with the utmost precision and are of high quality.
Please read this manual first and follow the instructions so you can enjoy the possibilities of
this product optimally.
1. APPLICATION AND OPERATION MEGAVIEW70
The antenna cable is, as you could say, looped through the modulator. The incoming antenna
signal is connected to the antenna connection, besides that you can connect an A/V device of
your choice to the input on the MegaView70. The outgoing antenna signal then carries both
the standard antenna signal and the added Audio/Video-signal (of for instance a DVD-player
or AV-camera). On every TV connected to this antenna system after the modulator (‘RF
OUT’ of your MegaView70) the added Audio/Video-signal can be watched on the selected
channel. You do not need to make any changes to the rest of your antenna network.
One infrared receiver is supplied as standard. Additional receivers can be purchased should
you wish to operate your equipment from different rooms. The infrared return channel only
works with amplifiers, splitters and aerial wall outlets that are return channel compatible.
Compatible components are usually marked ‘5 - 30 MHz’ or ‘5 - 68 MHz’. Your aerial specialist
can provide more information on this.
The modulator itself has no influence on the strength of the signal. The maximum length of
the cables to be used is determined by the present cable network in your home. If you want
to connect multiple TV sets or want to use a longer cable, we advice you to use an amplifier/
splitter. Your antenna material supplier can advice you in this.
2. CONTENTS OF THE PACKING
Check after unpacking if the following parts and accessories are present:
1x MegaView70 stereo modulator
1x Infrared receiver
2x Power adapter
1x IR extender cable with 1 LED
1x RCA-RCA cable
1x Scart adapter
3x Adapter F-connector to IEC-connector male
2x Adapter F-connector to IEC-connector female
1x User manual
