Bedienungsanleitung Marquant MCR1302 (Seite 24 von 92) (Englisch, Holländisch, Französisch)

38506

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

OPERATION

RADIO OPERATION

Switching to radio mode

Press MODE button on remote control

to select radio mode or tap the Radio

icon on the SOURCE menu on the

screen.

In radio mode, the following information

will appear on the display.

Selecting the frequency band

Press BAND on remote control or tap

BAND bar on the screen to select

desired band. The reception band will

change in the following order:

Selecting station

During radio mode, shortly press

button on the front panel or on the

remote control or tap

icon on

the screen to increase frequency, shortly

press button on the front panel or on

the remote control or tap

icon

on the screen to decrease frequency

by one step of channel spacing. Hold

the button longer for fast tuning. The

frequency is updated correspondingly

on display.

Press and hold

/ buttons on the

front panel, “Manual” will appear on the

screen display, you can adjust the

frequency manually. If there is no

operation for about 5 seconds, “Manual”

will disappear. The system will exit this

mode.

Setting memory

Press RADIO PRESET buttons (1~6)

on remote control or press

/ on the

front panel or on the remote control to

preset stations at radio mode. With this

system, a total of 24 stations (for two

wave band) or 30 stations (for three

wave band) can be stored in the

memory of six buttons.

Each band stores up to six preset

stations.

The stations might be FM1, FM2, FM3,

MW band. The operation is as below:

- Store in Memory Press and hold

desired memory location button for

several seconds. The current listening

station will be stored into the number

button.

- Or tap “CH” character on the screen

then press and hold M1~6 button

bars on the screen will stored the

current station to the location button.

- Retrieve a Preset Station

Press any one of the RADIO PRESET

buttons (1~6) on remote control to

retrieve a station which had been

stored in the memory in advance the

chosen number is shown on display.

Automatic Memory Story & Program

Scanning

- Program scanning

Shortly press AS/PS button on remote

control or on the front panel shortly

tap AS/PS bar on screen to scan

preset station. And it will hold at each

station for about 5 seconds.

- Automatic memory storing

Press and hold AS/PS button on

remote control or AS/PS bar on the

screen for about several seconds or

press AS/PS button on the front panel,

the radio searches from the current

frequency and checks the signal

strength until one cycle search is

finished. And then stations are stored

into the preset number button in turn

according to the strength of the

stations.

When auto search is finished, it will

enter into preset scan mode

automatically.

Note: In FM mode press and hold 1-

6 numeric buttons on the front panel

or on the remote control fro about 2

seconds, will store the current station

to the current numeric key position.

Mono/Stereo

Press MO/ST button on remote control

to select mono or stereo mode. You

can sometimes improve reception of

distant stations by selecting mono

operation.

Local/Distant

Press and LOC button on the remote

control to select between local and

distant stations.

FM1 FM2 FM3 MW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marquant MCR1302 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info