Bedienungsanleitung Marquant MPR88 (Seite 2 von 10) (Holländisch, Französisch)

498516

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

IMPORTANT

Make sure that function is set to TAPE before connecting

the AC cord or inserting batteries.

CAUTION

Use only the supplied AC cord. Use with other cords may

result in the risk of fire.

Using on batteries

Open the lid of the battery compartment on the rear and

C POWER SUPPLY

The batteries need to be replaced when:

The tape speed slows down, volume decreases, or

sound is distorted during operation.

notes on batteries

Do not mix different types of batteries or old batteries

with new ones.

Never recharge the batteries, apply heat to them or

take them apart.

Remove dead batteries.

If liquid leaks from the batteries, wipe thoroughly to remove.

D MAINTENANCE

To clean the cabinet

Use a soft cloth lightly moistened with mild detergent

solution. Do not use strong solvents such as alcohol.

benzine or thinner.

To clean the heads and tape paths

After every 10 hours of use, clean the Recording heads

and Playback head , the pinch roller and capstan .Use

a cotton swab 5 slightly moistened with cleaning fluid

or denatured alcohol.

Cassette tapes

To prevent accidental erasure, bread off the plastic tabs

on the cassette tape after recording with a screwdriver

or other pointed tool.

To record on the tape again, cover the tab openings with

adhesive tape, etc.

1 Set function to CD.

2 OPEN the disc compartment and place a disc with

the printed side up. The total number of tracks

is displayed.

3 Press PLAY/PAUSE to start play- the indicator

lights up:

The number of the track being played is displayed.

4 Turn VOLUME to adjust the sound.

STOP - Stops play.

PLAY/PAUSE - Pauses play. To resume play, press

again.

SKIP/SEARCH - Searches for a particular

point during playback. Keep or pressed and then

release it.

- Skips to the beginning of a track. Press or

repeatedly

E CD OPERATION

REPEAT

Press REPEAT once- the indicator lights up:

A single track is played repeatedly. Select a track

with or .

Press REPEAT twice- the indicator lights up:

All tracks are played repeatedly.

PROGRAM

In stop state, press PROGRAM, the indicator lights up,

and use skip/search to select the track. Will be program,

press play to start program play.

NOTE

Do not use irregular shape CDs(example: heart-shaped,

octagonal ones). It may result in malfunctions.

Do not place more than one disc in the disc

compartment.

Do not try to open the disc compartment during play.

Do not touch the lens. Doing so may cause malfunctions.

1 Set function to RADIO.

2 Select a band with BAND.

3 Tune to a station with TUNING.

4 Turn VOLUME to adjust the sound.

For better reception - Extend the FM antenna and orient

it for the best reception; AM antenna is inside the unit.

Position the unit for the best reception.

FM ST

Sets the FM or AM sound, insert a tape, Press rec start

recording.

F TUNER OPERATION

Use Type 1 (normal) tapes only.

PLAYING BACK A TAPE

1 Set function to TAPE.

2 Press STOP/EJECT to open the cassette

holder and insert a tape with the exposed side up and

the side to be played facing out.

3 Press PLAY to start play.

4 Turn VOLUME to adjust the sound.

STOP/EJECT - Stops play.

PAUSE - Pauses play. To resume play, press again.

F FWD/ REW - Fast forwards/rewinds. To

stop winding. press STOP/EJECT.

G TAPE OPERATION

RECORDING

Note that recording is done on only one side of the tape.

1 Insert a tape with the side to be recorded facing out.

Wind up the tape to the point where recording starts.

2 Get ready to record from the source.

To record from a CD: set function to CD and start play.

To record from the tuner: set function to RADIO and

tune to a station.

3 Press REC to start recording.

PLAY is pressed simultaneously.

To stop recording, press STOP/EJECT.

To erase a recording, set function to TAPE and start

recording.

To turn off the unit, set function to TAPE.

To listen with the headphones, connect headphones with a stereo mini plug to the PHONES jack.

If an erroneous display or malfunction occurs, disconnect the AC cord and remove all the batteries to turn off the

display. Then turn the power back on.

H GENERAL

Please check the copyright laws relating to recordings from disc, radio or external

tape for the country in which the machine is being used.

I SPECIFICATIONS

General

Speaker: 77 mm cone type (2)

Output: Headphones jack (stereo jack)

Power output: 1.5W +1.5 W

Power requirements: DC 12 V using eight size C batteries,

AC 230V, 50Hz (15W)

Weight: 2.4Kg (excluding batteries)

Dimensions: 290(W)x160(H)x270(D) mm

Accessory: AC cord (1)

Specifications and external appearance are

subject to change without notice.

insert eight (size C) batteries, not supplied, with the and

marks correctly aligned. then close the lid.

To switch from AC power supply to battery power supply,

disconnect the AC cord from the AC inlet.

Tuner section

Frequency range: FM : 88-108 MHz

AM : 540-1600 KHz

Deck section

Track format: 4 track, 2 channels

Frequency range: Normal tape

Recording system: AC bias

Erasing system: Magnet erase

Heads: Recording / playback head

Erasure head

CD player section

Disc: Compact disc

Scanning method: Non-contact optical scanner

(semiconductor laser)

GB-3 GB-4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marquant MPR88 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info