Bedienungsanleitung Marshall 1960AX (Seite 2 von 8) (Deutsch, Englisch, Französisch, Spanisch)

705349

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

ENGLISH

WARNING! IMPORTANT SAFETY

INSTRUCTIONS

Please read the instrucon manual for this speaker cabinet and any other

equipment to be used with this speaker cabinet carefully before use.

1. Read these instructions.

2. Follow all instructions and heed all warnings.

3. Do not attempt to remove or re-wire the internal speakers or any other

components within the speaker cabinet.

4. Never use a speaker cabinet or associated equipment in damp or

wet conditions. No objects lled with liquids should be placed on the

apparatus.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

9. No naked ame sources, such as lighted candles, should be placed on the

apparatus.

10. Ensure any associated equipment is switched off and unplugged from the

mains in the event of lightning storms or if unused for long periods of time.

11. Only use attachments/accessories specied by the manufacturer.

12. Always ensure all associated equipment is switched off and unplugged from

the mains before connecting or disconnecting the speaker cabinet.

13. Always ensure that the supplied speaker lead is used to connect the

speaker cabinet to associated equipment. Always plug the speaker lead

into the speaker cabinet before plugging it into the amplier.

14. Protect the speaker lead from being walked on, pinched or having heavy

objects rolled over it. Ensure the speaker lead is not entangled with any

other lead. If a replacement speaker lead is required, please contact your

authorised Marshall Dealer.

15. If the speaker cabinet has switchable impedance, please ensure that

the correct impedance is selected and that any associated equipment

impedance settings are also correctly set.

16. If the speaker cabinet has mono/stereo switching capability, ensure that

the switch is in the correct position for the desired operation.

17. Always move or transport speaker cabinets individually. Never attempt

to move or transport speaker cabinets if they have other cabinets or

associated equipment stacked on or under them.

18. Always ensure that the speaker cabinet is on a level surface, whether

used or stored individually, or as a speaker cabinet stack, and/or with

associated equipment placed underneath or on top.

19. Marshall speaker cabinets should only be stacked with compatible

Marshall speaker cabinets. Never attempt to stack another

manufacturers speaker cabinet with a Marshall speaker cabinet. If you

are unsure, contact your authorised Marshall Dealer.

20. Refer all servicing to qualied personnel. Servicing is required when the

speaker cabinet has been damaged in any way, such as liquid being spilled

or objects falling into it, the speaker cabinet being exposed to rain or

moisture, the speaker cabinet not operating normally or being dropped or

damaged in any way

KEEP THESE INSTRUCTIONS.

GETTING STARTED

Congratulations on purchasing your Marshall cabinet. Our cabinets are

designed with you in mind, with each speaker specially selected for its tone and

each unit lovingly crafted. We’ve got over 50 years’ worth of experience and this

allows us to deliver meticulously planned, high quality products. From major

international festivals and multi-million pound recording studios to local bars

and bedroom band practice, our cabinets are built to stand the test of time and

full all your performance needs.

4x12” mono/stereo switching facilies

To ensure maximum exibility, some of our 4x12” cabinets boast a mono/

stereo switching system on the back. When ‘stereo’ mode is selected, the

cabinet is split into two 8Ω ‘halves’ for use with a stereo amp. When ‘mono’

is selected you are offered two different impedance inputs (4Ω or 16Ω)

to choose from. Always ensure you select the correct one to match the

impedance of your amplier and never use both inputs at the same time when

the cabinet is in ‘mono’ mode.

Single mono input

Some cabinets are tted with a single mono input socket. With this cabinet the

impedance and power rating are xed.

Use a suitable speaker cable to plug your guitar amplier into this socket.

Ensure the impedance and power handling of the cabinet is compatible with

your chosen amplier.

1) Mono/stereo selecon switch. Selects either stereo or mono mode.

2) Right input. When switch (1) is set to:

i) Stereo, this provides connection to the right* side pair of speakers. Rated

at 8Ω.

ii) Mono, this provides connection to all four speakers. Rated at 4Ω.

3) Le input. When switch (1) is set to:

i) Stereo, this provides connection to the left* side pair of speakers. Rated

at 8Ω.

ii) Mono, this provides connection to all four speakers. Rated at 16Ω.

*Right and le refer to the two stereo sides of the cabinet as seen when facing

the front of the cab.

2x12” stereo selecon facilies

Some of our 2x12” cabinets are tted with a mono/stereo selection plate on the

back. This enables you to split the cabinet into two halves for use with a stereo

set-up if you desire.

Mono usage: Use the input marked mono (1), the impedance of which is clearly

indicated above the jack.

Stereo usage: Use both inputs (1 and 2). Once again the impedance of each is

clearly marked.

300W RMS

150W / CH. STEREO

Marshall 1960AX Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info