The Cabinet Range
Using the design skills and production techniques developed at Marshall Amplification over thirty two years,
we have produced two cabinets which are perfectly suited to the new 7200 Dynamic Bass amplifier which can be
used singly or together.
Both cabinets use the highest grade birch ply and are ported and braced to exactly complement the specially
designed, heavy duty loudspeaker units.
Model 7041 4x10 with horn (400 watts RMS -8 Ohms).
The 4x10 with horn can handle a massive 400w RMS for compatibility with the 7200 or any other bass
amplifier with standard quarter inch jack speaker connections
For added versatility and to allow you to tune the 7041 to suit your style and sound, we have included an
infinitley variable horn to boost high end frequencies.
This cabinet delivers excellent full range response if used by itself or can form part of a stack system if used
in conjunction with another 7041 or the perfectly matched 7015.
Dimensions: Width 606mm x Height 606mm x Depth 370mm.
Model 7015 1x15 (200 watts RMS -8 Ohms).
The compact 7015 gives an impressively full tonal response accross the whole bass frequency range -making
it the ideal portable partner for the 7200 or as part of a Marshall bass stack in conjunction with the 7041. This
cabinet is rated at 200 watts and features a specially selected heavy duty 15" speaker.
Dimensions: Width 606mm x Height 606mm x Depth 370mm.
13. Compression On/Off Push Switch
Push switch which activates the compression
circuit.
14. Volume Control
Rotary control to set the overall output level of
the amplifier.
15. D.I. Pre or Post EQ Selection
Switch
Selection switch to offer a studio or PA engineer
with the choice of direct signal either before or
after EQ and compression has been added.
16. Power Switch
On\ Off mains power switch with LED indicator
and featuring soft start circuitry to minimise switch
on and switch off noise.
Models 7200, 72115 & 72410
Rear Panel Functions.
17. Mains Input Connector
For connection to mains power supply.
18. Twin Speaker Outputs
For connection to loudspeakers. The minimum
total load is 4 Ohms.
-72115
As the impedence of the internal 15" speaker is 8
Ohms, the connection of an extension cabinet (8
Ohms only) is possible.
-72410
As the impedence of the internal speakers is 4
Ohms, it is NOT possible to connect an extension
speaker.
19.Tuner Output Jack
Instrument level buffered output for direct
connection to an electronic tuner.
20. Effects Send Jack
Jack socket to connect to the input of an external
effects processor.
21. Effects Return Jack
Jack socket to accept the output from an external
effects processor. Note: (The output level of the
effects loop is nominally centred around + 4 dB
which makes it compatible with most rack effects
processors).
22. Line Output Jack
Jack socket ideal for connection to home
recording equipment.
23. Graphic Footswitch Jack
Jack socket for the connection of a single
On/Off footswitch for the Graphic EQ.
24. Balanced D.I. Output
For direct connection to recording or PA mixing
desks and switchable pre or post EQ (15).
25. D.I. Level Selection Switch
Selects 0dB or -20dB D.I. output levels for
maximum interfacing flexibility.
26. Earth Lift Switch.
For the elimination of earth loops when
connecting to other earthed equipment.
ENGLISH
5
Please Note:
Models 72115, 72410 are fitted with castor cups, castors
can be ordered directly from Marshall Amplification plc.
Please use stock code: ‘CSN’ when placing your order.
