Bedienungsanleitung Marshall DSL1HR (Seite 3 von 6) (Englisch)

705270

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

ENGLISH

PLEASE READ THIS MANUAL CAREFULLY

BEFORE PLUGGING IN.

FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

KEEP THESE INSTRUCTIONS.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modications not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

This device complies with CAN ICES-3(B)/NMB-3(B)

COMPLIANCE STATEMENT

WARNING:

Before going any further, make sure that

your amplier is compatible with your

mains electricity supply. If you have any

doubt, please seek help from a qualied

technician – your Marshall dealer can

help you with this.

MAINS INPUT & FUSE:

The specic mains input voltage

rating that your amplier has been

manufactured for is indicated on the

rear panel of the amplier. Your amplier

is provided with a detachable mains

(power) lead, which should be connected

to the MAINS INPUT socket on the rear

panel of the amplier (Rear Panel Function

#12). The correct value and type of

mains fuse is specied on the rear panel

of the amplier.

NEVER attempt to bypass the fuse or t

one of the incorrect value or type.

TRANSPORTING YOUR EQUIPMENT:

Please ensure that your amplier is

switched off, unplugged from the mains

electricity supply and all removable

cables have been disconnected from

your equipment before attempting to

move it.

WARNING! IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SET UP INFORMATION:

1. When using the DSL1HR, or

the DSL1CR with an extension

speaker cabinet, you must ensure

that the speaker cabinet is of the

correct impedance rating. See

the LOUDSPEAKER guide in this

manual for specic information

regarding impedance matching (Rear

Panel Function #19).

WARNING Failure to do the above may

damage your amplier. When connecting

a speaker cabinet make sure that you

use a proper speaker cable. Never use a

screened (shielded) guitar cable for this

purpose.

2. Ensure that the POWER switch is

set to the OFF position. (Front Panel

Function #11)

3. Connect the supplied mains (power)

lead into the MAINS INPUT on the

rear panel rst and then into the

mains electricity supply. (Rear Panel

Functions #12)

4. Ensure that the volume controls on

the front panel are set to zero. (Front

panel Functions #2 & #5)

5. Plug your guitar into the INPUT jack

socket. (Front Panel Function #1)

6. Switch the amplier ON using the

POWER switch (Front Panel Function

#11).

7. Turn the selected channel volume

up to your preferred level and your

amplier is ready to play.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marshall DSL1HR Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info