Bedienungsanleitung Marshall Haze MHZ15, MHZ40C (Seite 2 von 7) (Englisch)

442779

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Presenting the Haze series – 40 Watt combo and 15 Watt

head. Developed and engineered in the UK, these two

channel valve amplifiers, inspired by the British tones of the

60s and 70s, provides that classic Marshall roar with a

modern edge.

The MHZ40C 40Watt combo offers a dedicated overdrive

boost and series effects loop in a classic top loading 1x12"

combo loaded with a Celestion Marquee (G12-66) speaker –

custom designed in partnership with Marshall.

The MHZ15 15 Watt head can be paired with the optional

cabinets MHZ412AandMHZ412Btoformavalvepowered

mini stack

The vintage voiced effects section stores its settings per

channel for instant recall and provides a choice of classic

echo, vibe or chorus alongside a reverb providing the warmth

and transparency of a spring tank.

The reverb and effects are routed in parallel to the direct

signal so that no degradation of the direct signal occurs. By

turning the special reverb level and effects depth pots to

minimum ‘past the click’ and bypassing the effects loop on the

MHZ40C, the effect section is true bypassed, mechanically

removing the circuit from the amplifier – leaving the Haze

amps with an all-valve signal path.

1. Make sure that the speakers/cabinet(s) are connected to

the correct impedance LOUDSPEAKER jack(s) on the rear

panel.

See the Speaker Output guides in this handbook for specifics

regarding impedance matching. When using an extension

cabinet make sure that you’re using a proper speaker cable.

Never use a screened (shielded) guitar cable for this purpose.

WARNING! Failure to do any of the above will damage

your amp.

2. Ensure that the two VOLUME controls on the front panel

are set to zero.

3. Connect the supplied mains (power) lead into the MAINS

INPUT on the rear panel first and then into an electrical outlet.

4. Plug your guitar into the INPUT jack socket on the front

panel.

5. Turn the front panel POWER switch on. The switch’s LED

will illuminate and then wait a couple of minutes.

Haze 40 Only

6.Afterwaiting,engagetheSTANDBY switch.

STANDBYSwitch (17)

The Standby switch is used in conjunction with the Power

Switch (18) to ‘warm up’ the valves in the amplifier before

use and to mute the amplifier when required, such as when

you are changing guitars. When powering up the amplifier

we suggest engaging the Power Switch (18) first, leaving

the Standby switch in the ‘OFF’ position for two minutes to

allow the valves to heat up.

When switching the amplifier off, always disengage the

Standby Switch a couple of seconds prior to the main

Power Switch.

7. Your amp is ready to play.

MainsInput&Fuse

Your amp is provided with a detachable mains (power) lead,

which is connected on the rear panel. The specific mains input

voltage rating that your amplifier has been built for is indicated

on the back panel.

WARNING: Before going any further, make sure your

amplifier is compatible with your electrical supply. If you have

any doubt, please get help from a qualified technician - Your

Marshall dealer can help you in this respect.

The correct value of mains fuse is specified on the rear panel

of the amplifier. NEVER attempt to bypass the fuse or fit one

of the incorrect value.

Overview

The Basics

Getting Started & Powering Up

From Jim Marshall

I would like to take this opportunity to personally congratulate you on

choosing this Haze amplifier from Marshall.

As a musician myself I fully understand the thrill and enjoyment of

playing live music - whether that be on a stage to thousands, or in

the bedroom to yourself - there’s nothing quite like it. I also

appreciate the need for high quality equipment that not only delivers

the sound you’re looking for, but that also has the dynamic

play-ability and feature set that separates a good amp from a truly

fantastic one.

With these ideals firmly in mind, I set the Marshall team the

challenge of turning them into a range of all-valve driven amplifiers

that would be affordable, portable and look the part too. I must say I

was delighted when they presented me with what has now become

the Haze Series. Using the latest technology and good old fashioned

craftsmanship, these amplifiers have squeezed pure Marshall tone,

custom designed digital effects and innovative footswitching

technology into both a compact 40W combo and 15W Ministack.

Perfect for either the gigging musician or those seeking their very

own valve Marshall stack at home.

As with all Marshall products, the Haze Series undergoes stringent

quality control checks throughout its meticulous construction,

ensuring that the end result is fit for purpose and continues the high

standards expected of a Marshall amplifier.

Whether this is your first ever Marshall or the latest addition to your

arsenal of amps, the versatility, response and tone of the Haze

Series will only add to the guitar playing pleasure you’re no-doubt

accustomed to.

I wish you every success with your new Marshall amplifier. Welcome

to the family...

YoursSincerely,

Dr. Jim Marshall OBE

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marshall Haze MHZ15, MHZ40C Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info