Bedienungsanleitung Marshall MG15FX Gold (Seite 10 von 57) (Deutsch, Englisch, Französisch, Spanisch)

705314

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

FOOTCONTROLLER STOMPWARE PEDL-90008 (OPTIONAL) CONT. NOTES

Pressing only the Store switch at this

point will overwrite the altered Channel or

Footswitch preset.

To store an altered Channel preset to the

Footswitch instead, hold the Store switch

and while held down, press your chosen

Footswitch (1) - just like a normal Preset

Store.

To store an altered Footswitch Preset to

another Footswitch hold the Store switch

and while held down, press your chosen

Footswitch (1) - Just like a normal Preset

Store.

DIGITAL DISPLAY

When recalling a footswitch preset, the

Digital Display (3) will indicate which

footswitch number has been pressed.

If a Channel preset has been recalled the

Digital Display (3) will remain blank.

When either a Channel preset or

Footswitch preset has been altered the

Digital Display (3) will begin to flash. The

footswitch will flash the relevant number

if a Footswitch preset has been altered or

will flash a “-“ if a Channel preset has been

altered.

TUNER

The Tuner can be accessed in two ways:

MG15CFX & MG30CFX

By simultaneously pushing the Tap (10)

and Store (12) switches on the front

panel or by assigning the Tuner to the

footswitch. Note: On factory reset / first

switch on, the Tuner is already assigned to

Footswitch number 4.

Or, by assigning the Tuner to a footswitch.

This is carried out like any other Switch

Store. To assign the Tuner to the

footswitch hold down the Tap (10) and

Store (12) switches and press the chosen

footswitch you wish to assign it to. The

Digital Display (3) will swirl to show that

the footswitch has been assigned. You

can then release the footswitch and front

panel switch.

MG50CFX

By simultaneously pushing the Damping

(17) and Store (19) switches on the front

panel or by assigning the Tuner to the

footswitch. Note: On factory reset / first

switch on, the Tuner is already assigned to

Footswitch number 4.

Assigning the Tuner to a footswitch is

carried out like any other Switch Store.

To assign the Tuner to the footswitch

hold down the Damping (17) and Store

(19) switches and press the chosen

footswitch you wish to assign it to. The

Digital Display (3) will swirl to show that

the footswitch has been assigned. You

can then release the footswitch and front

panel switches.

FOR ALL AMPLIFIERS

When entering Tuner mode the unit

mutes and Clean/Crunch (3) and OD-1/

OD-2 (5) switches light yellow.

The Digital Display (3) indicates the

closest current note being played. The

indicator dot on the lower right hand

corner shows if the current closest note

♯.

The LED Status Panel (2) is used to show

how far away from the closest note the

current note being played is. When the

central FX Status LED lights, it indicates

the correct tuning, with the others

progressively indicating the tuning is up to

50 cents up or down.

To exit the Tuner push any footswitch,

the amplifier will then exit returning to the

settings before entering.

ENGLISH ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marshall MG15FX Gold Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info