Bedienungsanleitung Marshall MG50FX Gold (Seite 4 von 57) (Deutsch, Englisch, Französisch, Spanisch)

705316

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

MG15FX & MG30FX FRONT PANEL FUNCTIONS

1. INPUT JACK SOCKET

Input for your guitar. Use a good quality

guitar cable (i.e. one that’s screened/

shielded) to help prevent noise,

interference and unwanted feedback.

2. GAIN CONTROL

Controls the amount of signal entering

the pre-amp and the amount of distortion

created in the selected channel.

3. CLEAN/CRUNCH SWITCH

Selects between Clean (green) and Crunch

(red) channels.

4. BASS CONTROL

Turning up the Bass control will add

warmth and low-end depth to your sound.

5. OD-1/OD-2 SWITCH

Selects between OD-1 (green) and OD-2

(red) channels.

6. MIDDLE CONTROL

Adjusting the middle frequencies will vary

the amount of body in your sound.

7. TREBLE CONTROL

Increasing the Treble will make your

sounds brighter and more cutting, turning

it down will decrease your tone’s edge and

make it sound softer as a result.

8. REVERB CONTROL

This control lets you add a lush digital

reverb to the selected channel, from a

subtle hint to cavernous and all points

in-between. Furthermore, there are two

distinctly different sounding reverb types

for you to choose from – Studio or Spring.

Studio emulates the sound of a studio

plate reverb while, as expected, Spring

emulates the sound of a classic spring

reverb unit.

9. VOLUME CONTROL

Controls the volume of the selected

channel.

10. TAP (MANUAL) SWITCH

Matches the delay FX time to the time

between two pushes. The LED flashes at

the selected delay time. Holding down

the Tap switch for longer than 2 seconds

switches the amp between manual and

ENGLISH

preset mode. When using the optional

footcontroller, holding both the Tap

switch and the Store switch will activate

the tuner.

11. FX CONTROL

Selects and adjusts one of five digital

effects - Chorus, Phaser, Flanger, Delay

and Octave.

12. STORE SWITCH

Stores the current amp settings into

the current channel or to recall with the

optional footcontroller. When in manual

mode the Store button lights red.

13. MASTER CONTROL

Controls the master volume of the

amplifier.

14. MP3 LINE IN SOCKET

Jam to your favourite track by connecting

the line out or headphone output of your

player here. Adjust the volume of your

player to match that of your guitar and

you’ve got the perfect ‘play-along’ practice

system.

15. FOOTCONTROLLER SOCKET

¼” Jack socket for the connection of the

optional footcontroller (PEDL-90008) -

see page 8.

16. HEADPHONE SOCKET

For use when silent practice is the order

of the day. Connection of headphones will

automatically mute the internal speaker.

17. POWER SWITCH

The power switch turns your amplifier

on and off. A channel switch will light up

when your amplifier is turned on and none

will be lit when the amplifier is switched

off.

Note: The specific mains input voltage rating

that your amplifier has been built for is shown

on the back panel. Before connecting to

the mains electricity supply, always ensure

that your amplifier is compatible with your

electricity supply. If you have any doubt,

please get advice from a qualified technician.

Your Marshall dealer will help you in this

respect.

ENGLISH

14 16

16 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marshall MG50FX Gold Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info