Bedienungsanleitung Mascott MOL-HA-IHWD01-B - Hot water dispencer (Seite 3 von 32) (Deutsch, Englisch, Holländisch, Französisch)

806939

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

3EN

or humidity.

• Do not expose the device to direct sunlight,

heat sources, excessive humidity or

corrosive environments.

• Do not place the device under any

mechanical stress.

• Improper use of the device could damage

the product.

• Please handle the device carefully. Impacts

or falls, even from a low height, can damage

the device.

• Do not open the casing as this may result in

electric shock.

• Do not attempt to disassemble or repair the

device or modify it in any manner.

• The device must be serviced if it has been

damaged in any way, i.e. the power supply cord/

plug is damaged; objects have fallen into it; it

has been exposed to rain or moisture; it has been

dropped or does not operate properly.

• Do not use abrasive cleaning solvents to clean

the device.

• Do not use foreign objects to clean the device.

IMPORTANT INFORMATION,

FOLLOW THESE INSTRUCTIONS

• This device can be used by children aged 8 and

over and people with restricted physical, sensory

or mental capacity or a lack of experience and

expertise, provided they are under supervision

or have been given instructions about safely

using the device and are aware of the potential

hazards. Children must not play with the device.

Cleaning and maintenance must not be done by

children unless they are over the age of 8 and

under supervision.

• Only use the device indoors, in dry areas and not

in the vicinity of water, other liquids or humidity.

• Do not use the device if it, the cable or power

plug has fallen into water or any kind of fluid.

• Never immerse the device, cable and power plug

in water or any kind of fluid.

• Do not pick up the device if it has fallen into

water or any kind of fluid. Remove the plug from

the power socket immediately. Do not use the

device again.

• Place the device on a flat and stable surface, in a

place where it cannot fall over.

 CAUTION! Dispelled water is hot. Do not

touch it to avoid burning yourself.

• The device is equipped with an overheating

safety feature. This is activated if the temperature

becomes too high. If this is the case, you must let

the device cool down before it can be used again.

Switch OFF the device and then remove the plug

from the power socket. Allow the device to fully

cool down. The device needs approximately 30

minutes to fully cool down.

• Remove the power plug from the power socket if

the device is unused for long periods of time.

• When removing the plug from the power socket,

pull the plug itself, not the cable.

• Do not operate the device using an external time

switch or a separate remote control system.

 INSTALLING AND USING

THE DEVICE

Open the packaging carefully before taking out

the device. Make sure the device is complete

and undamaged. If any components are missing

or damaged, contact the vendor and do not use

the product. Retain the packaging or recycle it in

accordance with local regulations.

PARTS & FEATURES DEVICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mascott MOL-HA-IHWD01-B - Hot water dispencer Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info