Bedienungsanleitung master AC 1000 E (Seite 24 von 64) (Deutsch, Englisch, Dänisch, Italienisch, Polnisch)

588457

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

DANE TECHNICZNE

MODEL

AC 1000 E

AC 1200 E

Cooling capacity

10200 BTU/h

3000 W

11500 BTU/h

3400 W

Power/Ampere consumption for cooling

1137 W / 5,2A 1325 W / 6,3 A

Air volume (max. speed)

480 m

Humidity removal capacity

1.2 l/h

1.4 l/h

Power supply

220-240V~. 50Hz

Compressor

Rotary

Refrigerant

R410A (Please refer to rhe rating labe.)

Fan speed

Timer

1～24 hours

Working temperature

18 ~ 32

Exhaust pipe

Ø 142x1500mm

Net Weight

27,5 kg

29,5 kg

Dimension

422x443x825 mm (WxDxH)

REMARK:

1. Measuring condition for above is as per EN 14511 : DB=35°C , WB=24°C

*DB = temperature of dry bulb = room temperature, WB = temperature of wet bulb = relative humidity.

2. Test condition for data in our rating label is as per safety regulation: EN 60335-2-40

3. Current & Fuse : F2L250V or T2L250V

4. The appliance AC 1200E series can be connected only to a supply with system impedance no more than 0.289Ω. In case necessary, please

consult your supply authority for system impedance information. "

BEFORE USE

GENERAL SAFETY

 Only use in the upright position on a flat level surface and

at least 36cm from any objects (fig 1 & 4).

 Do not place objects on the unit or block the air inlet /

outlet (fig. 2).

 Closely supervise any children and pets when the unit is in

use.

 This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that

they do not play with appliance.

ELECTRICAL SAFETY

 For indoor use only.

 Switch off and unplug when not in use.

 Do not use in humid or wet environments (Fig 3)

 Do not pull the unit along by the cord.

 IF THE SUPPLY CORD IS DAMAGED, IT MUST BE

REPLACED BY AN ELECTRICIAN OR SIMILARLY

QUALIFIED PERSON, TO AVOID HAZARD.

FOR MAXIMUM EFFICENCY

 Close doors and windows

 Keep curtains of blinds closed during the sunniest part of

the day

 Keep filters clean

 Once room has reached the desired conditions, reduce

temperature and ventilation setting

PARTS

Front (Fig. 5)

1. Control Panel

2. Carrying handle

3. Water tank

4. Caster

5. Air outlet

Back (Fig. 6)

6. Air filter

7. Exhaust air outlet

8. Air filter

9. Air inlet

10. Cord storage

11. Air inlet

12. Water stopper / drainage point

Accessories (Fig. 7)

13. Exhaust hose.

14. Adaptor - for insertion over hose and into window spacer

(or into hole in the wall/window).

15. Cover for adaptor

16. Window spacer - for filling the open window space

17. Window spacer - for filling the open window space

18. Window spacer - for filling the open window space and

with hole for connection to exhaust hose.

19. Drain tube for continuous drainage

20. Active carbon filter

21. Remote control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

master AC 1000 E Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info