Bedienungsanleitung master DH 716 (Seite 6 von 109) (Alle Sprachen)

588487

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

2. Working mode indicator (continuous working, humidity

40%, 50%, 60%, 70%)

3. Humidity/Temperature display

4. Timer operation indicator

5. Temperature display button

6. Ionizer or TiO2 indicator (these are optional function de-

pending on the model you purchased)

7. DRYER indicator

8. DRYER button

9. High ventilation indicator

10. Speed/Ventilation button

11. Low ventilation indicator

12. Power indicator

13. ON/OFF (power) button

14. “Full Water” indicator

15. TIMER button

16. Ionizer or TiO2 button (these are optional function de-

pending on the model you purchased)

► Ambient light features

Blue light – room humidity > 70%

Green light – room humidity 50~70%

Red light –room humidity < 50%

Red light ash – water full alarm

Operation

1. Plug the unit into a correct mains socket. (Please refer

to the rating label at the rear of the unit for correct vol-

tage/frequency.)

2. Press ON/OFF button to turn on the unit. The compres-

sor will start to work.

3. Press humidity setting button to set the working model

you need: continuous working, humidity 40%, 50%,

60% or 70%. The relative indicator will light on.

4. Press speed/ventilation button to set the ventilation

speed, high or low. The relative indicator will light on.

5. Press the TIMER button to set the operating hour you

need (1~24 hours). The display window will show the

hour(s) you set as you press the TIMER button, after

releasing it for 8 seconds around, the display window

will return to the room humidity. As the set time has

been reached, the compressor will stop working auto-

matically.

6. By pressing the ”TEMP” button, the display window will

show the room temperature, after releasing the button

for 8 seconds around, the display window will return to

the room humidity.

7. DRYER function is turbo ventilation to dry the moistu-

re in the air continuously, so it could help to dry the

laundry.

8. To turn off the unit, press ON/OFF button again.

9. Pre-setting function By pressing TIMER button but wit-

hout turning on the other functions (including ON/OFF

button), you can PRE-SET the time for the machine to

work. For example, if you press the timer to ’2’, the unit

will work automatically after 2 hours

► 6. DRAINAGE

While the water tank is full, the compressor will stop for

self-protection and the water full indicator will turn into red.

To move the water tank, pull it out squarely from the unit.

After empting the water tank, place the water tank into spa-

ce. Make sure it is properly positioned, in order for the ’wa-

ter full’ sign to go out and your dehumidier is operating.

Please note, in case, the water tank has not been positio-

ned well, the water full indicator will turn into red.

► CONTINUOUS DRAINAGE

When the dehumidier is operated at very high humidity

levels, the water tank will require more frequent drainage.

In this situation, it may be more convenient to set the unit

up for continuous drainage with the following procedures:

1. Pull out the water tank (FIG. 5).

2. Connect the drain hole with water tube of inner diame-

ter: 11 mm. The water tube is not supplied with the unit

(FIG. 6).

3. Ensure the water will always drain away freely and the

tube will remain in right place. Note! In very cold weather

conditions, precautions should be taken to prevent the wa-

ter tube from freezing.

4. Put the water tank back to its position.

► 7. MAINTENANCE

Always unplug the unit from the mains before carrying out

any maintenance or cleaning of the unit.

CLEANING THE BODY

Use soft cloth to wipe the unit clean.

Don’t ever use volatile chemicals, gasoline, detergents,

chemically treated clothes, or other cleansing solutions.

These all could possibly hurt the cabinet.

CLEANING THE FILTER

This dehumidier is equipped with 2 lters (FIG. 7):

1. ANTI-DUST FILTER

Extract the lter holder, remove the active carbon lter.

Use a vacuum cleaner or tap the lter lightly for easy clea-

ning. If the lter is particularly dirty, use warm water with

a small amount of a small amount of medium strength

detergent.

Make sure the lter is completely dry before replacing.

Do not expose the lter to sunlight.

2. ACTIVE CARBON FITLER (for capturing the particles

of dust suspended in the air and preventing the produc-

tion of bacteria.)

The active carbon lter placed under the anti-dust lter is

not washable. Its life span is variable and depends on the

ambient conditions where the unit is used. The lter should

be checked periodically and replaced if necessary.

STORAGE

If not use the unit for an extended period of time. Please:

Turing the unit off, unplug and tidy AC cord.

► Completely empty the water tank and wipe it clean.

► Cover the unit and store where it will not receive direct

sunlight.

► 8. TROUBLE SHOOTING

THE UNIT DOES NOT OPERATE:

► Is the unit plugged in?

► Is the house electricity on?

► Is the room temperature below 5

C or above 35

C? If

so, then it is out of the working range of the unit.

► Ensure the humidistat (or ON/OFF switch) is turned

on.

► Check the water tank is positioned properly in the unit

and it is not full.

master DH 716 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info