Bedienungsanleitung Mastercraft X35 (Seite 256 von 285) (Englisch)

614264

256

Zoom out

Zoom in

Vorherige Seite

1/285

Nächste Seite

if lines or ttings appear to be leaking.

• Aluminum wheels also require attention

to routine maintenance, particularly in

keeping them clean. Failure to do so may

result in damage that is not covered by

warranty.

• The trailer and wheels should be washed

weekly during boating season, and af-

ter every use if the trailer has been sub-

merged in salt or brackish water. Use a

soft brush, mild detergent and/or mild

degreaser. A quality spray-on wheel

cleaner may also be used. Ensure that

anyproductusedisspecicallyindicat-

edforuseonaluminum. (Many clean-

ers are too harsh and will result in pitting

or other damage to the wheel surface.)

Many car washes use strong chemicals

and should be avoided when that is the

case. Removing road lm, contami-

nants and brake dust (all of which retain

moisture) is critical to ensuring that the

wheels will retain their luster and quality

nish for a long period of time. Any ex-

posure to a hard winter climate, particu-

larly road salt and/or chemicals, requires

immediate cleaning the same as submer-

sion in salt water. NEVER CLEAN

HOT WHEELS. Allow wheels to cool

or cool them with running water. If the

wheels are too hot, signicant damage

can occur to the wheels. It is also im-

portant to seal the wheels with aseal-

antthatreducesstaticandresistsbrake

dust. Check at an automotive supply

store for an appropriate sealant.

Before Initial Use:

• Read this entire Owner’s Manual com-

pletely.

Before Every Trip:

Ensure that all vehicle and trailer main-

tenance has been done as set out in the vari-

ous owner’s manuals.

• Verify that the tongue weight and load

are within proper specication. Further,

be sure that the load distribution is cor-

rect so that the tow vehicle and trailer

are properly balanced front-to-back and

side-to-side.

• Check the brake uid reservoir to ensure

it has the proper uid level.

• Examine the brake rotor surfaces and re-

move excessive rust, ushing the brakes

if the trailer has been idle for an extend-

ed period of time or submerged in salt

water and not ushed afterwards.

• Examine the actuator for wear, bent

parts, corroded/seized parts or other

damage.

• Test the actuator to verify the brakes are

working prior to use.

• Verify all running and brake lights, as

well as turn signals and hazard lights,

are working properly and that all wir-

ing is properly connected. It must not

be touching the road, but loose enough

to make turns without disconnecting or

damaging the wires.

• Verify the coupler latch and all equip-

ment that connect the trailer and tow ve-

hicle are properly secured and adjusted.

• Verify that there are no leaks in the hy-

draulic system.

MasterCraft Trailers • 2014 MasterCraft Owners Manual Page 7-31

M A S T E R C R A F T T R A I L E R S

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastercraft X35 Seite 256

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info