Bedienungsanleitung Mastercraft X46 (Seite 153 von 285) (Englisch)

614265

153

Zoom out

Zoom in

Vorherige Seite

1/285

Nächste Seite

Page 4-44 2014 MasterCraft Owners Manual • Boat Operations

B O A T O P E R A T I O N S

Location:

All of these options are found on the

tower.

Operation:

1) Lights: The lights

will be either can

lights or blue LED

lights. Either work

from a two-position,

ON-OFF switch on

the dash or driver’s

armrest, depending

on model.

2) Speakers: The speakers operate through

the audio system. See the Video Display

Gauge information for your model in

this Owner’s Manual for instructions on

how the volume is controlled.

3) Board Racks: When board racks are or-

dered, there are three available options:

a) wakeboard storage on upper and low-

er arms;

b) wakeboard upper, and wakesurf low-

er; or

c) slalom ski storage upper and lower.

Note that, regardless of the type

of board or ski, it should be securely

clamped (or secured with a bungee cord

on the ZFT0 tower) so that board/ski

does not come loose or disengage from

the rack during boat operations. DO

NOT attempt to place the wrong type of

board within spokes (i.e., slalom skis in

a board rack) because the t will be im-

proper. Resulting loss or damage to the

board, or injury to individuals, is not the

responsibility of the manufacturer.

On the ZFT5 tower, the rack location

can be moved by backing off (unscrew-

ing) the adjustment knob all the way to

the top of the housing prior to moving

the board rack. There will be some slack

and slight movement as the knob is un-

screwed, but if the board rack is moved

at that time, failure is likely. Either the

internal bolt will bend and become unus-

able, or the aluminum housing may be

distorted and then unable to accept the re-

tightening of the knob back into place to

secure the board rack. These are the only

two positions that the knob should ever

be in. It is also important that the knob be

re-secured anytime the board rack is read-

justed. Otherwise, the rack could move or

shift unexpectedly, making anyone close

to the rack vulnerable to being struck by

the teeth of the rack or any boards that are

held by the rack.

Troubleshooting:

1) Lights: If the lights do not work when the

switch is turned ON, check the main cir-

cuit breaker panel to determine whether

the circuit has tripped, and re-set if it has.

If the circuit continues to trip or if the cir-

cuit is on but the lights still do not work,

take the boat to an authorized Master-

Craft dealer for attention.

2) Speakers: If the audio speakers on the

tower do not work, verify electrical

circuits by checking the main circuit

breaker panel. Re-set if it has tripped. If

it still does not work, take the boat to an

authorized MasterCraft dealer for repair.

3) Board Racks: If boards will not sit se-

curely in place, and it is determined that

the proper board for the proper rack is in

use, do not leave the board in the rack.

Take the boat to an authorized Master-

Craft dealer to determine the underlying

cause.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastercraft X46 Seite 153

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info