Bedienungsanleitung Masterpro BGMP-9131 (Seite 25 von 95) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

797866

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

7. Can you put frozen foods in Unit without defrosting?

Sure! Remember to add an average of 10 extra mins. to the cooking time for frozen meals.

8. Can I cook with oil in the pressure cooker?

Do not attempt to pressure fry in the One Touch Quick Pot. The Unit does not have safety measures

to prevent oil fumes and fire. Pressurized oil fumes could be a danger and can cause an explosion.

9. How do I turn off the Unit?

Press the Cancel Button on the Control Panel and unplug the Power Cord from the wall outlet and

the Unit Base.

CARE & CLEANING

CAUTION: Any leftover food or debris remaining in the Unit could prevent safety devices from oper-

ating correctly during subsequent use!

FOLLOW THESE CLEANING INSTRUCTIONS AFTER EACH USE.

1. Allow Unit to cool to room temperature before clean- ing. Do not attempt to clean a hot One

Touch Quick pot!

2. Unplug the Power Cord from the wall and then from the Unit Base.

3. Clean exterior of the Unit with soft, damp cloth or paper towel. Do not immerse the Unit Base in

water or pour water into housing.

4. Unlock the Pressure Release Valve by moving the Steam Release Switch to the Open position

and let go. Wash with mild, soapy water and rinse well. Use a small pin if necessary to remove any

blockages that may have occurred during cooking process. Check to see that the interior spring-

loaded part moves freely by pressing down on it. Check to see that it is free from debris.

5. Clean the Lid and Inner Lid (see INNER LID ASSEMBLY). Remove the Inner Lid Rubber Gaskets

from the Inner Lid. The Inner Lid Rubber Gaskets must be washed separately with a sponge or soft

cloth and warm, soapy water. Reattach the Inner Lid Rubber Gasket Rubber Gasket to the Inner Lid.

NOTE: Check periodically to make sure the Rubber Gasket is clean, flexible, and not torn. If

damaged, replace before operating Unit (see INNER LID ASSEMBLY).

6. Rinse upper and underside of Lid with warm water, making sure the Float Valve and Pressure

Release Valve are free from debris. Both valves should be able to move up and down freely, with the

Float Valve stopping only when the Float Valve Rubber Gasket meets the Lid. Dry.

7. Attach the Inner Lid to the Lid. Improper placement of the Inner Lid will prevent the Lid from

closing properly. (see INNER LID ASSEMBLY).

8. Remove the Inner Pot after every use. The Inner Pot is dishwasher safe, but to prolong its use,

you should wash it by hand using warm, soapy water and a soft cloth or sponge. Rinse and towel dry.

Do not use harsh chemicals or scouring pads.

9. To clean the condensation collector, slide to remove it; clean with warm, soapy water; and then

reattach it.

10. Customer Service should be contacted for any questions or parts (see the back of this manual for

contact information).

NOTE: The following parts can be placed in dishwasher: Inner Pot, Measuring Cup,

Spoon. We recommend hand washing all parts to prolong the life of the components.

Press the Program Dial again to start counting down.

NOTE: If the Yogurt Button is not pressed, the Unit will beep continuously, and the One Touch Quick

Pot will stay in standby mode.

7. Place the Glass Lid back on the One Touch Quick pot.

8. Leave the One Touch Quick pot undisturbed, allowing the yogurt to incubate for 4–10 hrs.

9. Once the incubation is done, press the Cancel Button, remove the yogurt, and store in a con-

tainer in the refrigerator.

TIPS

• The incubation process can be shorter(as low as 4 hrs.) or longer (as long as 10 hrs.) depending on

the thickness of the yogurt. Longer incubation periods produce thicker & tarter yogurt.

• For thicker, Greek-style yogurt: After incubation, spoon the yogurt into a cheesecloth-lined colander

set over a bowl and let the yogurt drain for at least 1 hr. (potentially overnight) in the refrigerator.

Discard or reserve the whey that drains from the yogurt.

• Use covered glass, ceramic, or plastic containers to store the yogurt in the refrigerator, and store up

to two weeks (the flavor will be best |within the first week).

FREQUENTLY ASKED QUESTIONS

1. What is the material of construction?

This appliance has a stainless steel housing and Inner Pot.

2. How do you assemble/disassemble the Unit?

This appliance comes fully assembled with Float Valve, Pressure Release Valve, and Inner Lid.

Attach Condensation Collector before operation (see PREPARING FOR USE).

3. What is the default time?

Each cooking mode has a default time that appears when you selected an ideal program button.

Before the timer on the LCD Display begins counting down, the appliance must reach the proper

pressure frst and/or temperature for that mode.

4. How long does it take for the Unit to reach full pressure and for the cook time clock to start

a countdown?

When the Unit reaches the desired cooking pressure, the LCD Display will change color from orange

to red and the cooking time will begin counting down. The time required to reach the desired

pressure setting depends on the volume, concentration, and ratios of solid to liquid in the Unit –

generally 5–40 mins.

5. Can you change the cooking time from the default setting?

Of course! You can change the cook time two ways. Select LOW, MED, or HIGH. These are

preprogrammed settings that will give a predetermined time. Or else, you can also select the Time

Button to adjust the cooking time to suit your needs.

6. Can you leave the Unit on while not at home?

The One Touch Quick Pot has a delayed start function. However, leaving the Unit on while not at

home is not recommended.

YOGURT

THE YOGURT-MAKING PROCESS

1. Firstly, you should place the Inner Pot in the 6. Base.

2. Pour 2 qts. of whole or 2% milk into the One Touch Quick pot’s Inner Pot.

3. Press the Yogurt Button. The LCD Display will show “7:00.” Press the Program Dial to accept the

program. Use the dial to choose between the default preset time settings or press the 7. Timer

Button to set a custom time. Press the Dial to confirm your selected time.

4. Once the Unit reaches 180° F, the Unit will maintain the temperature. Then, the Unit will stop

heating from 180° F and the LCD Display will show “COOL.”

5. Once the milk reaches 110° F, the One Touch Quick pot will beep and the LCD Display will show

“ADD.” Using a ladle or measuring cup to remove 1 cup of milk from the Inner Pot. Mix the 1 cup milk

with yogurt or yogurt starter. Then, return the milk mixture into the Inner Pot with the remaining

heated milk and stir gently.

6. Press the Yogurt Button. Use the Program Dial and the Timer Button to adjust the time if needed.

Masterpro BGMP-9131 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info