Bedienungsanleitung Mastervolt Charge Mate Pro 40 (Seite 4 von 16) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

785621

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

Charge Mate Pro

The Mastervolt Charge Mate Pro is a current limited electronic charge relay for the distribution of

charge current between two battery banks. The battery banks are connected when the voltage rises

above a pre-set value for at least 5 seconds. When the voltage drops the battery banks are isolated

again. With an optional remote control switch the Charge Mate Pro can be used as a switch for

emergency starts of the motor. This will overrule the automatic function and disables the current

limit.

Only use battery banks with the same type of charge characteristics.

The Charge Mate Pro can only be applied in 12 Vdc or 24 Vdc installations with a common

negative.

Safety regulations and measures

Install the Charge Mate Pro according to the instructions in this manual.

The Charge Mate Pro must be used in accordance with the specifications

Connections and safety features must be executed according to the locally applicable regulations.

Use cables with appropriate size wire and keep the cable connections as short as possible. Use

reliable terminals and fasten the bolts tightly, but do not over torque.

Examine your electrical installation on a regular base, at least once a year. Defects such as loose

connections, burnt wiring etc. must be corrected immediately.

Liability

Mastervolt cannot be held liable for:

Consequential damage resulting from the use of the Charge Mate Pro.

Possible errors in the included manual and the consequences of these.

Use that is inconsistent with the purpose of the product.

Warranty

Mastervolt assures the product warranty of the Charge Mate Pro during two years after purchase,

on the condition that the product is installed and used according to the instructions in this manual.

Installation or use not according to these instructions may result in under performance, damage or

failure of the product and may void this warranty. The warranty is limited to the cost of repair and/or

replacement of the product. Costs for labour or shipping are not covered by this warranty.

Correct disposal of this product (Waste Electrical & Electronic Equipment)

This product is designed and manufactured with high quality materials and

components, which can be recycled and reused. When this crossed-out wheeled bin

symbol is attached to a product, it means the product is covered by the European

Directive 2012/19/EU.

Please be informed about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal

household waste. The correct disposal of your old product will help prevent potential negative

consequences to the environment and human health.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastervolt Charge Mate Pro 40 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info