Bedienungsanleitung Mastervolt ChargeMaster 12 15-2 (Seite 3 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

785641

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

CHARGEMASTER 12/15-2 ENGLISH

Product description and application

The ChargeMaster 12/15-2 is a battery charger for

charging and maintaining the charged condition of

lead batteries and supplying users connected to a

battery in permanent installations. The charger is

provided with two separate DC-outlets, which supply

a total maximum of 15 Amps. The voltage drop over

the DC-wires is automatically compensated.

Installation and instructions for use

1. Due to possible moisture accumulation and

optimal heat discharge, the ChargeMaster

battery charger must be installed in a well-

ventilated room as close as possible to the

batteries. We advise to mount the unit on a flat

metal surface with the connecting cables

downward.

2. See figure 2. Use the cables provided to

connect the charger to the battery set. Connect

the black wire between the charger’s negative

output (6) and the minus pole (–) of the battery.

Connect the red wire between the charger’s

positive output (7) and the plus pole (+) of the

battery. The plus pole of an optional second

battery set (e.g. a starter battery) should be

connected to the second positive output (8). Be

sure to fix all screws tightly

3. Plug the AC mains cable into the wall socket.

The battery charger will now commence the

charging cycle.

Indications

The charger is equipped with a green LED indicator

(2) that flashes when the unit is charging. The

indicator remains lit continuously to indicate that a

charging cycle has been completed (float). If the

indicator is off while the plug of the AC-cable is

connected to the mains, contact your supplier.

Settings

See figure 1. There are 3 jumpers (3, 4, 5) on the

side of the mains and battery cables for specific

applications of the charger. If necessary, the

jumpers can be removed with small tongs or

tweezers.

 In case a battery isolator (diode) is used to

charge several batteries, the output voltage will

be increased (0,6V) to compensate the voltage

drop if jumper (3) is removed

 The charger is suitable for charging gel /

AGMbatteries (high float), if jumper (4) is

removed.

 The charger only functions as a drop charger

(force float), if jumper (5) is removed.

 Via plug (1) various settings can be adjusted in

terms of software to your specific wishes (control

software and interface not included). This plug

can also be used for external warning systems.

Check the Internet site www.mastervolt.com for

applications. Please mind that this plug is not

intended for connecting a battery temperature

sensor.

Safety regulations and measures

1. Install the charger according to the stated

instructions.

2. Never use chargers at a location where there is

danger of gas or dust explosions.

3. Connections and safety features must be

executed according to the locally applicable

regulations

4. If the plus and minus connections on the battery

are exchanged, an internal fuse will blow. Check

that all connections are connected correctly

before replacing the fuse. Be sure to use the

appropriate fuse (refer to specifications)

Guarantee terms

Mastervolt guarantees that this charger was built

according to the legally applicable standards and

stipulations. During production and before delivery

all chargers were exhaustively tested and

controlled. If you fail to act in accordance with the

regulations, instructions and stipulations in this

user’s manual, damage can occur and/or the unit

will not fulfil the specifications. This may mean that

the guarantee will become null and void.

The guarantee period is 2 years.

Liability

Mastervolt cannot be held liable for:

 Damage resulting from the use of the battery

charger.

 Possible errors in the included manual and the

consequences of these.

 Use that is inconsistent with the purpose of the

product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastervolt ChargeMaster 12 15-2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info