Bedienungsanleitung Mastervolt Mass Sine Ultra 24 4000 (Seite 5 von 27) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

785685

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

EN / Mass Sine Ultra

1 GENERAL INFORMATION

1.1 Product description

The Mass Sine Ultra is a sine wave inverter. It converts DC

energy from the battery into AC output power.

1.2 Use of this manual

Reproduction, transfer, distribution or storage of part or all of

the contents in this document in any form without the prior

written permission of Mastervolt is prohibited.

This manual serves as a guideline for the safe and effective

use and installation of the Mass Sine Ultra:

• For the installer this manual gives directions for the

installation, operation and commissioning.

• For the end user, this manual gives directions for the

operation, maintenance and possible correction of minor

malfunctions.

• Every person who works with the device should be

familiar with the contents of this manual, and must

carefully follow the instructions contained herein.

• Store the manual in an accessible place.

1.3 Validity of this manual

This manual is valid for the following model:

Part no

Model

26024000

Mass Sine Ultra 24/4000

All the specifications, provisions and instructions contained

in this manual apply solely to the Mastervolt-delivered

standard version of a single Mass Sine Ultra.

1.4 Scope of warranty

Mastervolt assures the product warranty of the Mass Sine

Ultra during two years after purchase, on the condition that

all instructions and warnings given in this manual are taken

into account during installation and operation.

Among other things, this means that installation is carried

out by a qualified electrician, that installation and

maintenance are executed according to the stated

instructions and correct working sequence, and that no

changes or repairs may have been performed on the Mass

Sine Ultra other than by Mastervolt. The warranty is limited

to the costs of repair and/or replacement of the product by

Mastervolt only.

Costs for installation labour, shipping of the defective parts

and indirect damage are not covered by this warranty. For

making an appeal on warranty you can contact your supplier

directly, stating your complaint, application, date of purchase

and part number / serial number.

1.5 Liability

Mastervolt accepts no liability for:

• consequential damage due to use of the Mass Sine

Ultra;

• possible errors in the manuals and the results thereof.

1.6 Changes to the Mass Sine Ultra

Changes to the Mass Sine Ultra may be carried out only after

obtaining the written permission of Mastervolt. This is not

applicable for DIP-switches which are used for user settings.

1.7 Identification label

Figure 1-1: Example of an identification label

The identification label is positioned at the right side of the

Mass Sine Ultra, see figure 1-1.

CAUTION!

Never remove the identification label.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastervolt Mass Sine Ultra 24 4000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info