Bedienungsanleitung Mastervolt MasterBus Serial Interface (Seite 3 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

785587

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

EN / MasterBus–Serial interface / March 2011

MASTERBUS

2 MASTERBUS

2.1 WHAT IS MASTERBUS?

All devices that are suitable for MasterBus are

marked by the MasterBus symbol.

MasterBus is a fully decentralized data network for

communication between the different Mastervolt

system devices. It is a CAN-bus based communication

network which has proven itself as a reliable bus-

system in automotive applications. MasterBus is

used as power management system for all connected

devices, such as the inverter, battery charger,

generator and many more. This gives the possibility

for communication between the connected devices, for

instance to start the generator when the batteries are

low.

MasterBus reduces complexity of electrical systems

by using UTP patch cables. All system components

are simply chained together. Therefore each device is

equipped with two MasterBus data ports. When two

or more devices are connected to each other through

these data ports, they form a local data network, called

the MasterBus. The results are a reduction of material

costs as only a few electrical cables are needed and

less installation time.

3 INSTALLATION

3.1 CONNECTION

What you need:

❑ MasterBus-Serial interface (included)

❑ MasterBus connection cable (included, 6m)

❑ RS232 crossed wire (included)

See gure 1

• Insert the MasterBus connection cables into the

MasterBus data ports of the MasterBus–Serial

interface.

• Connect the Serial connection cable between the

MasterBus–Serial interface and the Serial port of your

device.

☞

Only the RS232 devices mentioned in chapter

4 are suitable for using the MasterBus–Serial

interface.

For central monitoring and control of the connected

devices Mastervolt offers a wide range of panels which

show full status information of your electrical system

at a glance and a push of a button. Four different

panels are available, from the small Mastervision

compatible 120 x 65mm LCD screen up to the full

colour MasterView System panel. All monitoring panels

can be used for monitoring, control and conguration of

all connected MasterBus equipment.

New devices can be added to the existing network

in a very easy way by just extending the network.

Mastervolt also offers several interfaces, making even

non-MasterBus devices suitable to operate in the

MasterBus network

For direct communication between the MasterBus

network and a product which is not from Mastervolt,

the Modbus interface is recommended.

CAUTION: Never connect a non-MasterBus

device to the MasterBus network directly!

This will void warranty of all MasterBus

devices connected.

For information how to set up a MasterBus network

refer to the manual of your MasterView display.

✓

MasterBus

Display MasterBus–Serial

Interface

MasterBus

Powering

Device

with Serial

Connection

QRS 232

Figure 1: MasterBus–Serial interface in system

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mastervolt MasterBus Serial Interface Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info