613880
8
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
8
ENGLISH USERS MANUAL SOLADIN 600
LED indicator
The operation mode of the Soladin is displayed by
means of a LED indicator at the front side of the
housing. In normal operation it flashes yellow: the
longer the LED illuminates yellow, the more power
is converted.
If the irradiation of the PV-modules is insufficient, for
instance at night, the Soladin switches off
automatically. When switched off, the LED indicator
is off.
Failures
As long as the indication LED isn’t illuminated red,
no failure is detected: the Soladin is operating
normally. If an error occurs, it is detected by the
apparatus itself: the LED indicator turns red. See
table 2.
Consult an installer, if you cannot solve the problem
by means of the table below.
NOTE: during sunrise or sunset a low Solar
voltage is detected by Soladin, indicated by
a red blinking LED indicator. This is a normal
situation
Indication of the LED Meaning What to do?
LED is off
Insufficient irradiation Nothing. The Soladin operates normally, but irradiation of the PV
modules is insufficient (for instance during night time)
LED is off
No power from the
PV modules
Consult an installer if the LED indicator is off during daytime.
The wiring between the PV modules and the Soladin might be
defective. Check for loose connections or incorrect polarity.
Yellow blinking
Normal operation Nothing. The Soladin operates normally. The longer the LED
illuminates yellow, the more power is converted.
Slow blinking long red
pulses
Reclosure time Nothing. After the Soladin was (re)connected to the AC grid, it checks
the quality of the AC grid before it starts operating normally. This may
take up to 5 minutes.
Fast blinking long red
pulses
Restart time lag Nothing. A system check is carried out during sunrise. This may take
up to 15 seconds before the Soladin starts operating normally.
▬▬▬▬▬▬▬▬
Uninterrupted red
No grid voltage Plug the AC-plug of the Soladin into the wall socket; check the fuse in
the meter cupboard.
Red blinking 1 time
Solar voltage too low Nothing; normal condition during sunrise and sunset.
Consult an installer if the problem remains while irradiation of the PV
modules is sufficient.
Error in the PV installation. Are the specifications of the PV modules
in accordance with the Soladin?
Red blinking 2 times
Solar voltage too
high
Consult an installer. Error in the PV installation. Are the specifications
of the PV modules in according with the Soladin?
Red blinking 3 times
AC grid voltage too
high
Check the grid connection.
Red blinking 4 times
AC grid voltage too
low
Check the grid connection.
Red blinking 5 times
Grid frequency too
high or too low
Check the grid connection.
Red blinking 6 times
Internal temperature
too high
Air flow of the Soladin may not be obstructed. If the problem remains,
switch off the Soladin by removing the AC-plug from the wall-socket
and consult an installer.
Red blinking 7 times
NTC error Consult an installer for repair of a defective safety device in the
Soladin.
Table 2
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mastervolt Soladin 600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info