Bedienungsanleitung Matrix ALB5x (Seite 4 von 16) (Englisch)

664293

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

GROUNDING INSTRUCTIONS

The unit must be grounded. If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk

of electric shock. The unit is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must be plugged into

an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances. If the user does not follow these

grounding instructions, the user could void the Matrix limited warranty.

ADDITIONAL ELECTRICAL INFO

In addition to the dedicated circuit requirement, the proper gauge wire

must be used from the circuit breaker box, to each outlet that will have

the maximum number of units running off of it. If the distance from the

circuit breaker box to each outlet, is 100 ft (30.5 m) or less, then 12 gauge

wire should be used. For distances greater than 100 ft (30.5 m) from the

circuit breaker box to the outlet, a 10 gauge wire should be used.

ENERGY SAVING / LOW-POWER MODE

All units are congured with the ability to enter into an energy saving / low-

power mode when the unit has not been in use for a specied period of

time. Additional time may be required to fully reactivate this unit once it has

entered the low-power mode. This energy saving feature may be enabled

or disabled from within the ‘Manager Mode’ or ‘Engineering Mode.’

ADD-ON PCTV (3X AND 5X)

A 15 A or 20 A “Dedicated Circuit” with a non-looped (isolated) neutral/

ground is required. Each PCTV requires at least 1.2 A of current. No more

than 12 PCTVs should be used for each 15 A circuit and no more than 16

PCTVs should be used for each 20 A circuit. The power outlet should have

the same conguration as the plug. No adapter should be used with this

product. An RG6 coaxial cable with ‘F Type’ compression ttings will need

to be connected between the video source and each add-on PCTV unit.

ADD-ON DIGITAL TV (3x and 5x)

Additional power requirements are not needed for the add-on digital TV.

An RG6 coaxial cable with ‘F Type’ compression ttings will need to be

connected between the video source and each add-on digital TV unit.

DEDICATED CIRCUIT AND ELECTRICAL INFO

A “Dedicated Circuit” means that each outlet you plug into should not have

anything else running on that same circuit. The easiest way to verify this is

to locate the main circuit breaker box, and turn off the breaker(s) one at a

time. Once a breaker has been turned off, the only thing that should not have

power to it are the units in question. No lamps, vending machines, fans, sound

systems, or any other item should lose power when you perform this test.

Non-looped (isolated) neutral/grounding means that each circuit must have an individual

neutral/ground connection coming from it, and terminating at an approved earth

ground. You cannot “jumper” a single neutral/ground from one circuit to the next.

ELECTRICAL REQUIREMENTS

For your safety and to ensure good unit performance, the ground on this circuit must

be non-looped (isolated). Please refer to NEC article 210-21 and 210-23. Any alterations

to the standard power cord provided could void all warranties of this product.

The A3x, E3x, ALB3x, A5x, E5x, ALB5x, A7xe, E7xe and ALB7xe are designed to

be self powered and do not require an external power supply source to operate.

Without an external power supply, the console’s start-up time may be delayed.

Add-on TV’s and other console accessories will increase the time needed for

start-up. An external power supply will ensure power is provided to the console

at all times and is recommended when add-on accessories are used.

For units with an integrated TV (like the 7xe and 7xi), the TV power requirements are

included in the unit. An RG6 coaxial cable with ‘F Type’ compression ttings on each

end will need to be connected to the cardio unit and the video source. Additional

power requirements are not needed for the add-on digital TV (3x and 5x). For units

with an add-on PCTV (3x and 5x), the TV power requirements are separate.

NOTE: All units with Virtual Active

™

must be powered.

110 V UNITS

All Matrix 3x, 5x, 7xe and 7xi 110 V Suspension Elliptical Trainers and Ascent Trainers

require the use of a 100-125 V, 60 Hz and a 15 A “Dedicated Circuit”, with a non-looped

(isolated) neutral/ground for power. This outlet should be a NEMA 5-15R and have

the same conguration as the plug. No adapter should be used with this product.

Suspension Elliptical Trainers can be daisy-chained together with up to 4 units per 15

A dedicated circuit. Ascent Trainers can be daisy-chained together with up to 3 units

per dedicated 15 A circuit. Matrix daisy-chain cord adapters are sold separately.

220 V UNITS

All Matrix 3x, 5x, 7xe and 7xi 220 V Suspension Elliptical Trainers and Ascent Trainers

require the use of a 216-250 V, 50 Hz and a 15 A “Dedicated Circuit”, with a non-looped

(isolated) neutral/ground for power. This outlet should be a NEMA 6-15R and have

the same conguration as the plug. No adapter should be used with this product.

Suspension Elliptical Trainers can be daisy-chained together with up to 4 units per 15

A dedicated circuit. Ascent Trainers can be daisy-chained together with up to 3 units

per dedicated 15 A circuit. Matrix daisy-chain cord adapters are sold separately.

North American

power cord plugs

shown. Depending

on your country, the

plug type may vary.

110 NEMA 5-15P

PLUG

220 NEMA 6-15P

PLUG

Matrix ALB5x Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Matrix ALB5x

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info