Bedienungsanleitung Matrix Lifestyle ClimbMill (Seite 10 von 91) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

738333

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

MAINTENANCE SCHEDULE

ACTION FREQUENCY

Clean and inspect the ClimbMill:

• Turn o the machine with the ON/OFF switch, then unplug the power cord at the

wall outlet.

• Clean entire machine using water and a mild soap applied to a soft cloth. Never

use solvents, as they can cause damage to the ClimbMill. Never spray cleaner

directly onto the machine or console.

• Inspect the power cord. If the power cord is damaged.

• Make sure the power cord is not underneath the machine or in any other area

where it can become pinched or cut during storage or use.

• If any labels are damaged or illegible.

BEFORE EACH USE

Clean underneath the machine:

• Turn o the machine with the ON/OFF switch, then unplug the power cord at the

wall outlet.

• Remove the service cover from the front of the machine by the 2 screws and

wipe or vacuum any grease, dust particles or other objects that may have

accumulated on any surface. Return the service cover to its previous position.

• Wipe or vacuum any dust particles or other objects that may have accumulated

around the machine.

WEEKLY

Unplug the ClimbMill and clean the AUTO STOP SENSORS (located under the

bottom step).

WEEKLY

IMPORTANT!

• Turn o the machine with the ON/OFF switch, then unplug the power cord at the

wall outlet. Wait 60 seconds.

• Inspect all assembly bolts of the machine for proper tightness. Reference

assembly steps for proper tension of each bolt.

• Remove the front access cover. Wait until ALL LED lights turn o.

• Clean the area to eliminate any lint or dust particles that may have accumulated.

Failure to do so may result in premature failure of key electrical components.

• Check step motion by rotating the steps backwards to ensure free movement.

• Check stability to ensure the ClimbMill does not rock or wobble. Adjust levelers

as necessary.

MONTHLY

MAINTENANCE

Preventative maintenance is the key to smooth operating

equipment, as well as keeping the users’ liability to a minimum.

Equipment needs to be inspected at regular intervals. Defective

components must be replaced immediately. Improperly

working equipment must be kept out of use until it is repaired.

Ensure that any person(s) making adjustments or performing

maintenance or repair of any kind is qualiﬁed to do so.

MAINTAIN LABELS AND NAMEPLATES: Do not remove

labels for any reason. They contain important information.

WARNING

Disconnect all power before servicing or moving the equipment.

To remove power from the ClimbMill, the power cord must be

disconnected from the wall outlet. To clean, wipe surfaces down

with soap and slightly damp cloth only; never use solvents.

AUTO STOP SENSORS

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Matrix Lifestyle ClimbMill Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Matrix Lifestyle ClimbMill

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info