Bedienungsanleitung Matrix T3xh (Seite 4 von 16) (Englisch)

664265

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

GROUNDING INSTRUCTIONS

The equipment must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current to reduce the

risk of electric shock. The unit is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must be plugged into

an appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances. If the user does not follow these

grounding instructions, the user could void the Matrix limited warranty.

ADDITIONAL ELECTRICAL INFO

In addition to the dedicated circuit requirement, the proper gauge wire

must be used from the circuit breaker box, to each outlet that will have

the maximum number of units running off of it. If the distance from the

circuit breaker box to each outlet, is 100 ft (30.5 m) or less, then 12 gauge

wire should be used. For distances greater than 100 ft (30.5 m) from the

circuit breaker box to the outlet, a 10 gauge wire should be used.

ENERGY SAVING / LOW-POWER MODE

All units are congured with the ability to enter into an energy saving / low-

power mode when the unit has not been in use for a specied period of

time. Additional time may be required to fully reactivate this unit once it has

entered the low-power mode. This energy saving feature may be enabled

or disabled from within the ‘Manager Mode’ or ‘Engineering Mode.’

ADD-ON DIGITAL TV (T1X AND T3X)

A 15 A or 20 A “Dedicated Circuit” with a non-looped (isolated) neutral/ground

is required. Each add-on TV requires at least 1.2 A of current (at 110 V or 220

V). No more than 12 add-on TVs should be used for each 15 A circuit and no

more than 16 add-on TVs should be used for each 20 A circuit. The power outlet

should have the same conguration as the plug. No adapter should be used

with this product. An RG6 coaxial cable with ‘F Type’ compression ttings will

need to be connected between the video source and each add-on TV unit.

DEDICATED CIRCUIT AND ELECTRICAL INFO

A “Dedicated Circuit” means that each outlet you plug into should not have

anything else running on that same circuit. The easiest way to verify this is

to locate the main circuit breaker box, and turn off the breaker(s) one at a

time. Once a breaker has been turned off, the only thing that should not have

power to it are the units in question. No lamps, vending machines, fans, sound

systems, or any other item should lose power when you perform this test.

Non-looped (isolated) neutral/grounding means that each circuit must have an individual

neutral/ground connection coming from it, and terminating at an approved earth

ground. You cannot “jumper” a single neutral/ground from one circuit to the next.

ELECTRICAL REQUIREMENTS

For your safety and to ensure good treadmill performance, the ground on this circuit

must be non-looped (isolated). Please refer to NEC article 210-21 and 210-23. Your

treadmill is provided with a power cord with a plug listed below and requires the listed

outlet. Any alterations of this power cord could void all warranties of this product.

For units with an integrated TV (like the 7xe and 7xi), the TV power requirements are

included in the unit. An RG6 coaxial cable with ‘F Type’ compression ttings on each end

will need to be connected to the cardio unit and the video source. For units with an add-on

digital TV (5x only), the machine in which the add-on digital TV is connected to powers the

add-on digital TV. Additional power requirements are not needed for the add-on digital

TV. For units with an add-on PCTV (5x only), the TV power requirements are separate.

110 V UNITS

All Matrix 5x, 7xe and 7xi 110 V treadmills require the use

of a 100-125 V, 60 Hz and a 20 A “Dedicated Circuit”, with a

non-looped (isolated) neutral/ground for power. This outlet

should be a NEMA 5-20R and have the same conguration as

the plug. No adapter should be used with this product.

220 V UNITS

All Matrix 5x, 7xe and 7xi 220 V treadmills require the use

of a 216-250 V, 50 Hz and a 20 A “Dedicated Circuit”, with a

non-looped (isolated) neutral/ground for power. This outlet

should be a NEMA 6-20R and have the same conguration as

the plug. No adapter should be used with this product.

North American

power cord plugs

shown. Depending

on your country, the

plug type may vary.

110 NEMA 5-15P

PLUG

220 NEMA 6-15P

PLUG

POWER REQUIREMENTS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Matrix T3xh Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Matrix T3xh

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info