Bedienungsanleitung Matrix T5x (Seite 4 von 16) (Englisch)

738352

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

GROUNDING INSTRUCTIONS

The equipment must be grounded. If it should malfunction or

breakdown, grounding provides a path of least resistance for electric

current to reduce the risk of electric shock. The unit is equipped with

a cord having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet that

is properly installed and grounded in accordance with all local

codes and ordinances. If the user does not follow these grounding

instructions, the user could void the Matrix limited warranty.

ADDITIONAL ELECTRICAL INFO

In addition to the dedicated circuit requirement, the proper

gauge wire must be used from the circuit breaker box, to each

outlet that will have the maximum number of units running

off of it. If the distance from the circuit breaker box to each

outlet, is 100 ft (30.5 m) or less, then 12 gauge wire should be

used. For distances greater than 100 ft (30.5 m) from the circuit

breaker box to the outlet, a 10 gauge wire should be used.

ENERGY SAVING / LOW-POWER MODE

All units are congured with the ability to enter into an energy

saving / low-power mode when the unit has not been in use

for a specied period of time. Additional time may be required

to fully reactivate this unit once it has entered the low-power

mode. This energy saving feature may be enabled or disabled

from within the ‘Manager Mode’ or ‘Engineering Mode.’

ADD-ON DIGITAL TV (T5X)

Additional power requirements are not needed for the

add-on digital TV. An RG6 coaxial cable with ‘F Type’

compression ttings will need to be connected between

the video source and each add-on digital TV unit.

DEDICATED CIRCUIT AND ELECTRICAL INFO

A “Dedicated Circuit” means that each outlet you plug into should

not have anything else running on that same circuit. The easiest

way to verify this is to locate the main circuit breaker box, and turn

off the breaker(s) one at a time. Once a breaker has been turned

off, the only thing that should not have power to it are the units

in question. No lamps, vending machines, fans, sound systems, or

any other item should lose power when you perform this test.

Non-looped (isolated) neutral/grounding means that each circuit

must have an individual neutral/ground connection coming from

it, and terminating at an approved earth ground. You cannot

“jumper” a single neutral/ground from one circuit to the next.

ELECTRICAL REQUIREMENTS

For your safety and to ensure good treadmill performance, the

ground on this circuit must be non-looped (isolated). Please refer

to NEC article 210-21 and 210-23. Your treadmill is provided with a

power cord with a plug listed below and requires the listed outlet. Any

alterations of this power cord could void all warranties of this product.

For units with an integrated TV (like the 7xe and 7xi), the TV power

requirements are included in the unit. An RG6 coaxial cable with ‘F Type’

compression ttings on each end will need to be connected to the cardio

unit and the video source. For units with an add-on digital TV (5x only), the

machine in which the add-on digital TV is connected to powers the add-on

digital TV. Additional power requirements are not needed for the add-on

digital TV. For units with an add-on PCTV (5x

only), the TV power requirements are separate.

110 V UNITS

All Matrix 5x, 7xe and 7xi 110 V treadmills

require the use of a 100-125 V, 60 Hz and a

20 A “Dedicated Circuit”, with a non-looped

(isolated) neutral/ground for power. This

outlet should be a NEMA 5-20R and have

the same conguration as the plug. No

adapter should be used with this product.

220 V UNITS

All Matrix 5x, 7xe and 7xi 220 V treadmills

require the use of a 216-250 V, 50 Hz and a

20 A “Dedicated Circuit”, with a non-looped

(isolated) neutral/ground for power. This

outlet should be a NEMA 6-20R and have

the same conguration as the plug. No

adapter should be used with this product.

POWER REQUIREMENTS

FCC REGULATIONS

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or

operating in conjunction with any other antenna

or transmitter.

2. This equipment complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed

and operated with a minimum distance of 20

centimeters between the radiator and your body.

North American

power cord plugs

shown. Depending

on your country, the

plug type may vary.

110 NEMA 5-20P

PLUG

220 NEMA 6-20P

PLUG

Matrix T5x Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Matrix T5x

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info