Bedienungsanleitung Mavic Wintech Alti (Seite 12 von 26) (Englisch)

472806

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

12. TRIP RESET

12.1. To reset your last trip, press

and hold the 2 buttons together for

2 seconds.

The reset data are:

– Trip distance

– Average speed

– Maximum speed

– Vertical speed

– Cumulated vertical gain

– Lap time and their associated

data Clock, Odometers, Home

and Current altitude are not

reset.

Wintech USB computers can store

up to 10 trips of 5 hours each in

its internal memory. Only the last

one is displayed on the Wintech

computer itself.

When you reset the last

trip, it does not erase

the internal memory of

the Wintech computers.

Those 10 last trips are still

available for download at

the next PC connection.

So, if you ride for several days without downloading your Wintech data to your PC, you will not

lose any of the 10 last trips, while still being able to reset the last trip before the next one.

The 11

trip will replace the oldest of the 10 previous trips.

12.2. FULL 0 RESET

Once the daily trip has been reset, if you press and hold together the 2 buttons (BPR and BPL)

for 8 seconds, the reset of the whole system starts and all default settings will be restored.

All screen digits and logos will light up for 3 seconds. Then, the digits will count down from 9 to

0 and after 6 seconds, screen 1 will be displayed.

This operation erases your settings and replaces them with the default settings. It

also cancels the sensor pairing. So, before it works properly, you need to pair all the

sensors again, following the instruction described in section 10.2 of this user guide.

13. USE OF LAP TIME (CR)

In the course of a session you can use up to 9 lap times in order to evaluate your performance

on specic hills or sections.

Remember, the lap time only starts during a session i.e. when the computer already indicates a

speed.

From any screen in the course of a session, press and hold the right button for 2 seconds to

start the lap time. The “CR” symbol ashes. The lap time starts when you release the right button

and indicates the number of the lap time.

When a lap time has been started, the elapsed time of the current lap time replaces the “ATM”

data in screen 3.

To stop the current lap time, from any screen, press the right button for 2 seconds.

The screen automatically switches to screen 3, displaying the “ATM” of the lap time you have

just stopped. Press any button, to return to the overall display of your session.

To start the next lap time, press the right button for another 2 seconds, and so on for the

9 possible lap times.

When all 9 lap times are used, “FULL” appears on the display if you try to start a new lap time.

The computer automatically returns to screen 3 after 2 seconds.

To learn how to read the lap time data, go to section 14.4 of this user guide.

2 sec.

any

screen

8 sec.

3 sec.

auto

3 sec.

auto

3 sec.

auto

2 sec. 2 sec. After

2 sec. auto

to CR9

Start CR1 Stop CR1

any

screen

(1, 2, 3,

4, 5)

12.1

12.2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mavic Wintech Alti Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info