Bedienungsanleitung Max SFX Series (Seite 12 von 133) (Englisch)

545558

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

SFX SERIES USER’S GUIDE

Rev 2.2 10

If no indicators have illuminated, power cycle the unit once to make sure, and press the power button on the rear

panel. If there is still a problem, please proceed to Chapter 3 (Troubleshooting).

Status and Control of the Satellite Receiver

Varying levels of status and control of the satellite receiver can be accomplished by one of the following:

1. Locally, using the Front Panel LCD/Keypad Interface – the essential commands to get started are provided in

this Guide;

2. Remotely, using the Terminal Interface – described briefly here, with IDC Application Notes available for

more detail;

3. Remotely, using the Web based Graphical User Interface (GUI) – the operations are described in this Guide;

4. Remotely, using Simple Network Management Protocol (SNMP) – described briefly here, with IDC

Application Notes available for more detail;

5. Remotely, using International Datacasting’s NetManager, via the Network Control Channel (NCC) –

described briefly here.

Controlling the Receiver with the Front Panel LCD

Display/Keypad Interface

The Front Panel LCD/Keypad Interface provides the most convenient way to configure the receiver when it first comes

out of the box, and later on if other means of control are not available. For example, it can provide a quick means to

setup IP addresses in order to gain further access with the Web GUI. It also provides essential real time metrics

information.

Basically, the front panel interface is divided into two groups of items: display items and menu items. Display items are

used to provide real-time metrics information. Menu items are used to configure the unit, through the individual editing

of configuration parameters.

Table 1- 1 lists the items belonging to the display item group and Table 1- 2 lists the items belonging to the menu item

group in the order in which they appear. Display item 1 or 2 will generally be displayed during normal operation. From

there, you can press the arrow keys to navigate around the various other display items, or enter the menu item group.

Pressing the check mark button is generally the same as pressing Enter on a keyboard and commits an action or

selection. Pressing the X button is generally the same as pressing Esc on a keyboard and aborts an action or

selection. The X button is also used to exit from the menu item group back to the to the display item group. When you

are in the display item group, you can press X twice to return to display item 1.

When power is applied to the unit, you will always start the cycle at Menu main item 1 (Carrier A). You are able to

cycle through the main items by using the vertical arrow keys ( ˆ ) or ( ˇ ). To examine or change one of the main item

parameters press the check mark button ( √ ) to enter the sub menu. You can move through the sub menu

parameters by using the horizontal arrow keys (< for back or > forward). If you wish to change a parameter, press the

check mark button ( √ ) to enter the edit mode or use the vertical arrow keys ( ˆ ) or ( ˇ ) which will select it.. In the case

of a numeric value, a flashing cursor will appear over one digit. To change that digit, use the vertical arrow keys ( ˆ ) or (

ˇ ). To change another digit in this parameter, use the horizontal arrow keys (< for back or > forward) to select it and

repeat. When you have finished, commit your changes by pressing the check mark button (√). If the sub menu item is

not numeric, using the vertical arrow keys ( ˆ ) or ( ˇ ) will allow you to cycle through the available settings. Commit your

choice as above.. A * beside a displayed selection indicates that this is the current configured value being used by the

receiver. Two examples of how to do this are shown below the tables.

NOTE:

The LCD

Display/Keypad

interface will

remember the

last menu item

you accessed

and will always

start there the

next time you

enter the menu

item group from

the display item

group. The

same is true in

reverse – it will

remember the

last display item

when you return

from the menu

item group.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Max SFX Series Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info