Bedienungsanleitung Maxcom MC 6800 (Seite 9 von 20) (Englisch)

761883

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

3.1.2 Direct Dialing

Press <TALK ON/SPEAKERPHONE> to take the line and enter the phone number. Press it again to turn on the

speakerphone.

3.1.3 Call from the contacts

Press <MENU/OK> to access the contacts list and select the desired phonebook entry. Press <TALK

ON/SPEAKERPHONE> to dial out to the selected entry, press it again to turn on the speakerphone.

3.1.4 Call from the Call Log

Press <UP> to access the call log and press <UP/DOWN> to select the desired call log entry. Press <TALK

ON/SPEAKERPHONE> to dial out to the selected call log entry, press it again to turn on the speakerphone.

Alternatively, press <MENU/OK> to access the call log from the main menu.

3.1.5 Call from the redial list

Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial number. Press <TALK

ON/SPEAKERPHONE> to dial out to the selected redial number, press it again to turn on the speakerphone.

3.1.6 Call timer

Your handset automatically times the duration of every call. The call timer will display a few seconds after the call

has made. It is shown in hours, minutes and seconds format (HH:MM:SS).

3.2 Make a call from direct access memory

In idle, press and hold <M1>/<M2>/<M3> to dial the number pre-stored into the keys respectively.

Press <TALK ON/SPEAKERPHONE>, and then press and hold <M1>/<M2>/<M3> to dial the number pre-stored

into the keys respectively.

You need to set the direct access number first. Please see section 7.3.11 for details.

- If no number is stored, you will hear double beeps tone.

3.3 Answer a Call

If the handset is not on the charging cradle:

When the phone rings, press <TALK ON/SPEAKERPHONE> to answer a call, press it again to turn on the

speakerphone.

If the handset is on the charging cradle or the base station and if AUTO ANS is set to ON: when the phone rings,

pick up the handset to answer a call.

3.4 Audio Boost Feature

The audio boost feature allows you to amplify the handset earpiece volume to compensate for the ear’s limited

sensitivity.

1. To turn on the audio boost feature, press <Amplify> at any time during a call. The handset top indicator turns on.

2. When the audio boost feature is activated, press <Slide UP/DOWN> to increase or decrease the earpiece

volume within the specific frequency range set in Equalizer. See section 7.3.5 for more details.

3. To turn off the audio boost feature and return the earpiece volume back to normal, press <Amplify> again and

the handset top indicator light turns off.

- The audio boost feature will be turned off automatically when the call is ended.

3.5 End a Call

During a call connection, press <TALK OFF> to end the call.

Put the handset on the base station to end the call.

3.6 Adjust Earpiece and Handsfree Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of earpiece and handsfree volume.

During a call:

Press <SLIDE UP/DOWN> to select volume 1-5. The current setting is shown.

When you end the call, the setting will remain at the last selected level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxcom MC 6800 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Maxcom MC 6800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info