Bedienungsanleitung Maxdata platinum 3200 i (Seite 44 von 45) (Englisch)

171513

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

44 Regulatory and Integration Information

Installation Requirements

CAUTION

Follow these guidelines to meet safety and regulatory requirements when installing this board

assembly.

Read and adhere to all of these instructions and the instructions supplied with the chassis and

associated modules. If the instructions for the chassis are inconsistent with these instructions or

the instructions for associated modules, contact the supplier’s technical support to find out how you

can ensure that your computer meets safety and regulatory requirements. If you do not follow these

instructions and the instructions provided by chassis and module suppliers, you increase safety risk

and the possibility of noncompliance with regional laws and regulations.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that the

calculated total current loads of all the modules within the computer is less than the output current

rating of each of the power supplies output circuits.

Place Battery Marking

There is insufficient space on this server board to provide instructions for replacing and disposing of

the battery. For system safety certification, the following statement or equivalent statement may be

required to be placed permanently and legibly on the chassis near the battery.

CAUTION

Risk of explosion if battery is incorrectly replaced.

Replace with only the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

Use Only for Intended Applications

This server board was evaluated as Information Technology Equipment (I.T.E.) for use in computers

that will be installed in offices, homes, schools, computer rooms, and similar locations. The suitability

of this product for other applications or environments, (such as medical, industrial, alarm systems,

test equipment, etc.) may require further evaluation.

Power and Electrical Warnings

CAUTION

The power supply in this product contains no user-serviceable parts. Do not open the power supply.

Hazardous voltage, current and energy levels are present inside the power supply. Return to

manufacturer for servicing.

When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced

before removing it from the server.

To avoid risk of electric shock, turn off the server and disconnect the power cord, telecommunications

systems, networks, and modems attached to the server before opening it.

The power supply cord(s) is/are the main disconnect device to AC power. The socket outlet(s) must

be near the equipment and readily accessible for disconnection.

The power supply cord(s) must be plugged into socket-outlet(s) that is/are provided with a suitable

earth ground.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxdata platinum 3200 i Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info