650499
11
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
PX502 Tape Library Quick Start Guide
11
Figure 18 Removing the Foam
Restraints
e Install the tape cartridge magazines.
f Close the front doors.
g If you have removed the top cover for better access,
install the top cover back on the library.
N
OTE: Save the robotics restraints and re-usable tie wrap
for later shipping or relocation of the library.
N
OTE: Refer to the
PX500 Series User’s Guide
(PN 81-
81290) for more information on loading the tape
cartridge magazines.
Tie band
Metal
restraint
Metal
restraint
Foam
restraints
Robotics
umbilical
cable
Setting the Library Options
0
To set the library options:
1 Turn on the library by pushing power button located on
the bottom left-hand corner of the OCP (see figure 16).
2 The OCP asks you: “Are the internal packaging materials
removed?” (OK or NO).
3 Press OK to continue.
4 The OCP asks again: “Are the internal packaging
materials removed?” (OK or NO).
5 Press OK to continue. The library continues the boot
process. When complete, the Home screen displays.
6 Press Setup from the Home screen. The OCP displays
the Setup screen (see figure 19):
Figure 19 Setup Screen
7 From the Setup screen, use the up and down arrows to
highlight Cabinet and press Enter.
The Cabinet screen displays (see figure 20):
Figure 20 Library Options Screen
8 The Stack role screen allows you to configure the
library as a “Master” or “Slave” in a multiple library
stack. The library is configured “Solo” by default. If this
is a multiple library stack, use the up and down arrows
to highlight Stack role and press Enter displays the
following information about the library:
Enter
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Maxdata Quantum PX502 Tape Library wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info